NewYour coding agent can read the release notes before it upgrades.Set up the MCP server →
Go modules
Go modules, #1525 by repository stars
Latest stable
v0.41.1
Last release 17 days ago
05 Nov 2026
Ships unpredictably
gaps range from 8 days to 4 months
Nearly every release is documented
notes for 56 of the last 60 stable releases
Nothing withdrawn
no release was ever pulled
6 years old
137 releases · first in 2020
Drag across the ruler to compare, or tap a release to open it.
v0.41.1 fixes file transfers with scp and sftp.
v0.41.1 fixes file transfers with scp and sftp.
-o User= so the client connects to the intended relay. #735Your coding agent can read these notes before it upgrades. Set up the MCP server →
v0.41.1 fixes file transfers with scp and sftp.
-o User= so the client connects to the intended relay. #735Deprecated flag. --allow-local-tcp-forwarding is deprecated in favor of --allow-forwarding=any . It still works, and prints a notice when given on the…
v0.41.0 lets guests bring their own tools into a session: commands, VS Code Remote-SSH, Herdr, scp and sftp, and port forwards to the host's loopback. Each one is granted for the run or approved in your terminal. A new command prints the ssh config to reach a session by name.
Guest tools
ssh SESSION CMD, VS Code Remote-SSH, herdr --remote) runs privately on your machine, with pipes or its own terminal. It waits for your approval in the host terminal, or runs without asking under --allow-exec. Plain ssh still joins the shared terminal. #709--login-command chooses what a guest's plain ssh opens instead of the shared terminal. #709ssh -L) to literal loopback addresses (127.0.0.0/8 and ::1) wait for approval, or run without asking under --allow-forwarding=loopback. --allow-forwarding=any allows any destination. #710~a opens the oldest request. Answer y, a or n followed by the code it shows. Requests expire after 60 seconds, and a session with no terminal attached denies them. File transfers use the same review instead of desktop dialogs. #708, #724--full-access. It grants commands, file transfers and loopback forwards at once, and requires --authorized-user or --authorized-keys. #723upterm session ssh-config NAME. It prints a ~/.ssh/config block and the relay's known_hosts line, so ssh, scp, sftp and VS Code can reach a session by name. #725--detach. On a terminal, upterm host --detach now asks its start question rather than requiring --accept. #723session info, session current and the detached JSON report what guests may do (execution, tcpForwarding, fileTransfer), along with sshConfig. #710, #725Behavior changes
ssh -t … CMD) no longer joins the shared terminal with CMD ignored. It runs CMD privately, after approval or under --allow-exec. --accept doesn't allow it, so a detached --accept session denies it. To join the shared terminal, use plain ssh or upterm join.--allow-sftp (or --accept) lets file transfers run without approval when nobody is at the terminal.~a. The ~a escape is now consumed wherever approval is supported. To send a literal ~a, type ~~a, or change or disable the escape.--allow-local-tcp-forwarding is deprecated in favor of --allow-forwarding=any. It still works, and prints a notice when given on the command line. Its config key and environment variable keep working silently.TMUX, TMUX_PANE, STY, ZELLIJ, ZELLIJ_SESSION_NAME, ZELLIJ_PANE_ID, HERDR_ENV, HERDR_PANE_ID, HERDR_SESSION, HERDR_TAB_ID and HERDR_WORKSPACE_ID.upterm host refuses a relay answer whose session ID or SSH user contains anything but letters, digits and ._+=:-. That way a relay can't plant shell syntax in the commands upterm prints for you to paste. A relay's refusal message is shown as plain text. #726Embedding API
host/consent instead of host/sftp. There are no aliases.Host.SFTPPermissionChecker with Host.PermissionChecker, which implements CheckPermission(context.Context, consent.Operation, consent.ClientInfo, ...string) (consent.Decision, error) and ClearConnection(string). A checker must honor the deadline and cancellation, and handle SFTP, exec and forwarding.Host.TerminalConsent = true; it can't be combined with a checker. A nil checker without terminal consent denies anything not granted.Host.SFTPAutoAccept, and host.RelayKeyCheck with Host.RelayKeyTrusted, which report the relay key a session trusted.Fixes
Self-hosted relays
fly.example.toml sets GOMEMLIMIT to keep Go's heap inside the machine. #712Nothing published for this version
The environment variables and config keys deprecated in v0.39.0 are now ignored by the commands listed below; pass the flag instead. Each ignored sett…
v0.40.0 completes the move of per-run settings to command-line flags announced in v0.39.0, and fixes guests that left with an empty screen, a Linux session cleanup hang, and several relay shutdown and session-tracking problems.
Per-run settings are now command-line only
upterm: ignoring UPTERM_JOIN_TIMEOUT for upterm session set; pass --join-timeout. An explicit flag still works, and silences the warning for the setting it overrides. #677| Environment variable / config key | Ignored by | Use instead |
|---|---|---|
UPTERM_OUTPUT / output |
host, session info, session current |
-o / --output |
UPTERM_NAME / name |
host |
--name |
UPTERM_DETACH / detach |
host |
--detach |
UPTERM_WAIT / wait |
join |
--wait |
UPTERM_JOIN_TIMEOUT / join-timeout |
session set |
--join-timeout |
host --join-timeout, UPTERM_ADMIN_SOCKET and other standing settings still read env/config. upterm config edit reports the ignored keys as notices rather than errors.Fixes
ssh -tt … < /dev/null or a client with no stdin, now receives the session's screen before its exit status. Previously it often got a clean exit and nothing on its screen. #693uptermd now exits 1 and names the file when a configured private key can't be read. Previously it exited 0 without serving. #678Exit status change for scripts
upterm proxy returns 1 when the relay closes the connection or a read or write fails, even if ssh also reached end of input. Previously whichever result came first decided. Errors from proxy's own cleanup don't change the result. #687Compatibility
No protocol or JSON output changes: v0.40.0 clients work with older relays, and older clients work with the updated relay. For Go callers, io.ReplayBudget is now read once when each Server starts.
v0.40.0 completes the move of per-run settings to command-line flags announced in v0.39.0, and fixes guests that left with an empty screen, a Linux session cleanup hang, and several relay shutdown and session-tracking problems.
Per-run settings are now command-line only
upterm: ignoring UPTERM_JOIN_TIMEOUT for upterm session set; pass --join-timeout. An explicit flag still works, and silences the warning for the setting it overrides. #677| Environment variable / config key | Ignored by | Use instead |
|---|---|---|
UPTERM_OUTPUT / output |
host, session info, session current |
-o / --output |
UPTERM_NAME / name |
host |
--name |
UPTERM_DETACH / detach |
host |
--detach |
UPTERM_WAIT / wait |
join |
--wait |
UPTERM_JOIN_TIMEOUT / join-timeout |
session set |
--join-timeout |
host --join-timeout, UPTERM_ADMIN_SOCKET and other standing settings still read env/config. upterm config edit reports the ignored keys as notices rather than errors.Fixes
ssh -tt … < /dev/null or a client with no stdin, now receives the session's screen before its exit status. Previously it often got a clean exit and nothing on its screen. #693uptermd now exits 1 and names the file when a configured private key can't be read. Previously it exited 0 without serving. #678Exit status change for scripts
upterm proxy returns 1 when the relay closes the connection or a read or write fails, even if ssh also reached end of input. Previously whichever result came first decided. Errors from proxy's own cleanup don't change the result. #687Compatibility
No protocol or JSON output changes: v0.40.0 clients work with older relays, and older clients work with the updated relay. For Go callers, io.ReplayBudget is now read once when each Server starts.
Deprecation: move per-run settings to command-line flags before v0.40
v0.39.0 rebuilds a session's replay for joining terminals and adds keys for checking session status, richer JSON output, and safer upgrades.
Joining from a different terminal size
upterm attach now receives a rebuilt screen and recent history instead of replaying cursor movements recorded at earlier terminal sizes. This improves joining a desktop session from a phone or a narrower terminal, including Claude Code, shells, editors and terminal monitors. The live stream continues from the same point. #653, #664Session commands and terminal output
upterm host and upterm attach, type ~? at the start of a line to see the session's guests, relay connection and available keys without detaching. Type ~~? to send a literal ~?. Through an outer SSH connection with its default escape, use ~~? to reach upterm's status key, or connect with ssh -e none. upterm join's keys are unchanged. #662session info, wait, stop, set and upterm attach accept a session ID as well as a name. session list prints a plain table instead of a full-screen view and gains -o json and --hide-client-ip. Session names and output formats complete in the shell. #656, #663session current reports more of the session's state, and upterm version -o json is new. Existing fields remain, and all JSON timestamps use UTC.Host: becomes Relay: and Connected Clients: becomes Connected:. upterm attach gains --hide-client-ip; explicitly setting it to false shows addresses in CI too.upterm: …, without a usage block. Join waits print the cause once and redraw only the countdown. Plain SSH guests receive clearer refusal messages from updated relays, and every command's help documents its keys and exit statuses.Upgrade and configuration fixes
upterm upgrade selects the correct archive on Linux and reports offline or failed downloads instead of panicking. It replaces the binary being run, respects Homebrew, Scoop, deb and rpm ownership, and names the package-manager command to use. Without a version argument it no longer installs a release older than the running build. If an older Linux binary hits the archive-selection bug while upgrading, install v0.39.0 through your package manager or from the release assets below. #651, #655upterm config edit accepts editor arguments such as EDITOR="code --wait", checks keys and values after editing, and exits 1 when the file is invalid. Help, version and completion remain usable with a bad config. #654--server ssh://HOST defaults to port 22. SSH addresses with no hostname are refused. Charset tracking now follows cursor saves and restores, preventing ordinary text from appearing as line-drawing characters on a later join. #666, #661Exit-status changes for scripts
session wait still returns 0 for a stop. #658attach and join, and 125 from session wait. Unknown commands and extra arguments that were previously ignored now fail; an unknown command with --help also exits 1.host --detach, success still means the session started; use session wait for its eventual result.Deprecation: move per-run settings to command-line flags before v0.40
These environment variables and config keys still apply in v0.39.0, with a warning. Starting in v0.40, the affected commands will ignore them; pass the corresponding flag instead. #652
| Environment variable / config key | Affected commands | Use instead |
|---|---|---|
UPTERM_OUTPUT / output |
host, session info, session current |
-o / --output |
UPTERM_NAME / name |
host |
--name |
UPTERM_DETACH / detach |
host |
--detach |
UPTERM_WAIT / wait |
join |
--wait |
UPTERM_JOIN_TIMEOUT / join-timeout |
session set only |
--join-timeout |
host --join-timeout keeps reading env/config. The new output flags on session list and version are command-line-only from the start.
Compatibility
Upgrade the host to get the rebuilt replay; guests can continue using plain SSH or an older upterm. New JSON fields are additive, and permission fields are omitted when an older daemon cannot report them. For Go callers, set Host.ClaimTimeout per instance; the package-level host.ClaimTimeout is deprecated.
Nothing published for this version
Nothing published for this version
Nothing published for this version
Nothing published for this version
Nothing published for this version
New: `upterm join`, a guest command that joins a session and rejoins on its own when the connection drops. The host's view now offers it first, with t
New: upterm join, a guest command that joins a session and rejoins on its own when the connection drops. The host's view now offers it first, with the plain ssh line under it for guests without upterm.
New
upterm join joins a session from the connect string the host shares: ssh://, ws:// or wss://ID@host, a bare ID@host, or the ssh … line upterm prints, pasted whole. If the connection drops, it resets most terminal modes the session had set, says why it's waiting and when it tries next (Enter retries, Ctrl-C stops), and rejoins with the same connect string; ~. leaves. It exits with the session's status. It offers keys as ssh does (the agent's, then the default key files; a key is generated only when there are none) and checks the relay's key against known_hosts. It doesn't read ~/.ssh/config: use -i, or plain ssh, for per-host settings.upterm session info, upterm session current and upterm --help show a ➤ Join: line above ➤ SSH:. session info -o json and upterm host --detach -o json carry joinCommand beside sshCommand. A ws or wss relay behind a path gets no Join line, since upterm join takes no path.--force-command) starts again each time upterm join rejoins, so don't join one whose effects mustn't repeat with upterm join.Behaviour changes
upterm host and upterm join check a relay certificate from an authority no @cert-authority line trusts by the certificate's own key, as OpenSSH does. A stale pin of the public relay now reads as a changed key rather than an unknown host, a plain ssh-keyscan line for a self-signed relay now verifies it, and a certificate whose signer is @revoked is refused.upterm host waits for each guest to receive its exit status before closing its connection to the relay: one round trip normally, and at most about 2 s more when a guest doesn't answer. A guest that asks for a shell after that is refused rather than accepted and cut off.upterm attach no longer prints (status 0) when a session ends normally; any other status is still shown.Fixes
2026;2$y into the pane), DCS queries such as XTGETTCAP, kitty graphics queries and queries wrapped for tmux are now filtered from guests' output.ssh guest exited 255 ("remote command exited without exit status"), and upterm join waited for a host that wasn't coming back.upterm join treats an SSH_AUTH_SOCK nobody listens on as no agent. A waiting line no longer erases the line above it after the terminal is widened.upterm session info shows ending as soon as a session starts to tear down, so a script that reads it the moment upterm host returns is no longer told ready, with a connect string, for a session that has ended. upterm session wait is still the way to read how it ended.Docs
herdr --remote needs it, and has a troubleshooting line for Connection closed by UNKNOWN port 65535.Compatibility
upterm join joins any host's session through any relay. Through a relay older than 0.37.0, a refusal from another relay node can't be told from a missing session, so upterm join keeps waiting rather than stopping on it; through one older than 0.34.0, that holds for any key refusal.➤ Join: block above ➤ SSH:, and its JSON gains joinCommand. action-upterm reads sshCommand and is unaffected.Nothing published for this version
Nothing published for this version
New guide: Reach your Herdr agents from anywhere. Leave agents running in Herdr on a machine at home, and reach them from a phone or another laptop wi
New guide: Reach your Herdr agents from anywhere. Leave agents running in Herdr on a machine at home, and reach them from a phone or another laptop with upterm as the door. The forced-command, terminal-reset, open-session and jump changes below serve it.
Behaviour changes
--force-command) is hung up when its guest leaves or the session ends, rather than killed at once: SIGHUP, then its terminal is closed, then SIGTERM, then SIGKILL, a second apart (about 4 s at worst). A session that ends waits up to about 7 s for its forced commands. On Windows the command is still killed at once.--read-only. ssh -tt with a closed or piped stdin now gets the command's whole output and its exit status, where it used to get little or nothing.upterm attach also resets kitty's keyboard protocol and modifyOtherKeys on detach and on ~^Z, and a guest or upterm attach joining a session has those modes replayed to it.--accept and no --authorized-keys or --authorized-user is open: anyone with the session ID can join. upterm host warns about it on stderr, session info and the banner show Access: open: anyone with the session ID can join, and session info -o json and upterm host --detach -o json carry "open": true.ssh -J or -L) are listed as jump … → host:port in session info and its notifications, apart from the guest's terminal or SFTP entry, and the leave notification names every destination. Destinations are hidden under --hide-client-ip and in CI. guestCount still counts these entries, and an older CLI shows them as guest.upstream has no session, upstream can't look up sessions or upstream refused the key, where it used to get ssh: unable to authenticate with the upstream for all three. A self-hosted relay needs every node on 0.37.0 for this: an older node reports the old text, or passes the new one on unchanged.upterm session current exits 4 outside a session ($UPTERM_ADMIN_SOCKET unset, or nothing answers at it): silently with -o, as a shell prompt calls it, and otherwise with one line. It used to print its usage and exit 1. The README's prompt recipes check $UPTERM_ADMIN_SOCKET first.New
SSH_CONNECTION, SSH_CLIENT and SSH_TTY for that guest's connection, and no longer inherits the host's own. --hide-client-ip, and CI, leave out SSH_CONNECTION and SSH_CLIENT. Behind a relay older than 0.37.0 the command gets only SSH_TTY, and on Windows it gets no SSH_TTY.Fixes
upterm host reads known_hosts on every host-key check. On an SSH rekey it no longer re-prompts mid-session or, under --skip-host-key-check, appends the key again. A relay first trusted in that run, dialled by an address its certificate doesn't name, is refused at the rekey rather than at the next redial. Adding a key no longer glues it onto a last line that has no newline.ssh: unexpected packet in response to channel open: <nil>.Compatibility
AuthRequest gains local_addr, and the admin API gains GetSessionResponse.open, the client kind FORWARD, Client.forward_destinations and Client.unlisted_forwards, all optional.uptermd.upterm.dev already runs 0.37.0.
Nothing published for this version
709b70912eeec426694efee7f783d8b98c7790bd: fix(server): take a foreign value in a key its own lease holds as a loss, and leave a value that names no se
8c4540ff7a03ca53b635f782b3eb005a1996f584: feat(cli): show a reconnecting session's connect string, and why and when it retries (#617) (@owenthereal)
723a70172019ebaf69f8b28ee4f172bc4973014d: build(deps): bump github/codeql-action from 4.38.1 to 4.38.2 (#611) (@dependabot[bot])
Security issues can be reported privately through GitHub's private vulnerability reporting; see SECURITY.md.
Security
--authorized-user and --authorized-keys. The relay now honours the identity in a guest certificate only if it signed the certificate itself, and the host only if the relay it connected to did. If you run your own uptermd, upgrade every serving node: a patched host alone does not protect a session routed through an unpatched relay. uptermd.upterm.dev already runs 0.33.0.Behaviour changes
--detach, CI), the session's output now goes at the pace of the guest who joined first, as over plain ssh, instead of dropping every guest on a large burst. If the guest setting the pace takes no output for 5 seconds while output is waiting, it is disconnected and the next guest takes over.--accept, an SFTP operation nobody can be asked about is denied. When no permission dialog can be shown (no display, such as on a machine reached over SSH, or on Linux no zenity, qarma or matedialog), downloads, uploads and changes are refused and logged; before, they were allowed without asking. Directory listing still works. Pass --accept to allow transfers without asking, or --no-sftp to turn SFTP off. Detached sessions and CI are unaffected, because --detach requires --accept.--authorized-keys.Fixes
upterm session info show, not by the relay's certificate.~^Z in upterm host or upterm attach hands the shell a normal terminal (off a full-screen program's alternate screen, cursor shown, mouse off), and fg puts the program back. bg leaves the job stopped instead of detaching it; fg resumes it.upterm session wait exits 125, as for any other startup failure, when a detached session cannot record that it is ready. It used to report the teardown's hangup (129 on Unix) as the command's own exit.Security issues can be reported privately through GitHub's private vulnerability reporting; see SECURITY.md.
Nothing published for this version
Corrects upterm session set --help and its man page: a session a guest has already claimed also exits 0. No behaviour changes since v0.32.0.
Corrects upterm session set --help and its man page: a session a guest has already claimed also exits 0. No behaviour changes since v0.32.0.
Upgrading from v0.31? v0.32.0 changed:
upterm session info and upterm session stop exit 4, not 1, when no session has the name. Other failures still exit 1; session wait is unchanged.--authorized-user github:NAME fetches the user's public keys from github.com anonymously, logging a warning, when gh auth token does not answer within 5 s; before, the session failed to start. GitHub Enterprise hosts and github:NAME@HOST references still fail.upterm session set NAME --join-timeout D sets a running session's join timeout, counted from now: open a session during a build and give people a window to join after it. Each call restarts the window; 0 disables it. Once a guest has joined, the session is claimed and set changes nothing. session info -o json and upterm host --detach -o json show joinTimeout, joinDeadline and joinStateSource.upterm session info and upterm session stop exit 4, not 1, when no session has the name. Other failures still exit 1; session wait is unchanged.
Behaviour changes
upterm session info and upterm session stop exit 4, not 1, when no session has the name. Other failures still exit 1; session wait is unchanged.--authorized-user github:NAME fetches the user's public keys from github.com anonymously, logging a warning, when gh auth token does not answer within 5 s; before, the session failed to start. GitHub Enterprise hosts and github:NAME@HOST references still fail.New
upterm session set NAME --join-timeout D sets a running session's join timeout, counted from now: open a session during a build and give people a window to join after it. Each call restarts the window; 0 disables it. Once a guest has joined, the session is claimed and set changes nothing. session info -o json and upterm host --detach -o json show joinTimeout, joinDeadline and joinStateSource.Behaviour changes
upterm session info and upterm session stop exit 4, not 1, when no session has the name. Other failures still exit 1; session wait is unchanged.--authorized-user github:NAME fetches the user's public keys from github.com anonymously, logging a warning, when gh auth token does not answer within 5 s; before, the session failed to start. GitHub Enterprise hosts and github:NAME@HOST references still fail.New
upterm session set NAME --join-timeout D sets a running session's join timeout, counted from now: open a session during a build and give people a window to join after it. Each call restarts the window; 0 disables it. Once a guest has joined, the session is claimed and set changes nothing. session info -o json and upterm host --detach -o json show joinTimeout, joinDeadline and joinStateSource.9018c40561cb259d78b2479850011799b89ce3af: build(deps): bump github.com/cli/go-gh/v2 from 2.16.0 to 2.16.1 (#576) (@dependabot[bot])
78eba9ea19b7573e31490bf452bf49fae90be24c: Four follow-ups on --private-key under --identities-only (#564) (#569) (@optimalone)
upterm host becomes a daemon with its terminal as a client, and upterm attach puts any terminal on a running session (#559) (@optimalone)upterm host becomes a daemon with its terminal as a client, and upterm attach puts any terminal on a running session (#559) (@optimalone)Nothing published for this version
Nothing published for this version
67b12cb20daacec09503944b6548902655bdb70b: Bump github.com/cli/go-gh/v2 from 2.13.0 to 2.16.0 (#545) (@dependabot[bot])
ea380791bee316eafb71af8afa5105574caa5121: Clarify host-key confirmation errors when stdin closes (#543) (@owenthereal)
Nothing published for this version
6a27526287e3420b53c532094d73c9961ce04863: Authorize users from self-hosted forges with a single --authorized-user flag (#538) (@optimalone)
5f86e79cf9426d522bc6510610e4646458c910da: Exercise WebSocket CLI sync in Go E2E tests (#528) (@owenthereal)
Nothing published for this version
bdc1ebe0d8cb17e838f5c783a018c57e16b5d478: Keep PROXY headers optional for internal SSH hops (#527) (@optimalone)
1d36cf484b214d7f62fa2477f4f7ebfae8ae121f: Fix staticcheck SA1019 on deprecated sentryslog Option.Level (#514) (@optimalone)
postflight stanza (#522) (@owenthereal)postflight stanza (#522) (@owenthereal)Nothing published for this version
Nothing published for this version
Nothing published for this version
Nothing published for this version
1a62f520e63ffddf1c049e74b2d49539a62c90da: Bump github.com/getsentry/sentry-go/slog from 0.46.1 to 0.46.2 (#478) (@dependabot[bot])
e36c605712d770a209c22ca16e7beee4457cabc2: Add Claude Code GitHub Workflow (#461) (@owenthereal)
Nothing published for this version
00f00dada1b7d44d760a7af145aa1d8073747958: Add E2E tests using tmux as headless terminal emulator (#436) (@owenthereal)
059c8c48d67ef06b491d82cbca45a506fdd542e2: Bump github.com/samber/slog-multi from 1.6.0 to 1.7.0 (#435) (@dependabot[bot])
7ec24bb260719ce326d89852c3ba4a38a20b6478: Add --output flag to upterm session current for shell integration and improve session commands TUI (#433) (@
d842842f14d1102c3b8e09610a69b1635cb51484: Add robust XDG directory fallback for non-interactive environments (#419) (@owenthereal)
8245d37eadedcc14eefb664c9f2dfa8ac5ac2927: Add --skip-host-key-check flag to auto-accept server host keys (#412) (@owenthereal)
97cf757a97c961e995b643fd3699ad5ea7fe2e9f: Add Windows Support (#391) (@mxschmitt)
417e7b8f6799bf4580e9bb91e8a3601607120de3: Add Prometheus metrics for connection monitoring (#385) (@optimalone)
7d09f8141e943e701093575bd573f5d02c3f62e7: Fix known_hosts IPv6 formatting and remove IP address storage (@owenthereal)
35c7f85b9778b41dfc861a91af57959589f920db: Add --hide-client-ip flag with environment variable support and CI auto-detection (#381) (@optimalone)
954d1d54249a6580251f1b26c054a4fc5c72d9e0: Remove conflict_with (@optimalone)
Nothing published for this version
a17e7b4b127abe1907ba6764a07e02b892aef809: Fix macOS Gatekeeper quarantine issue for Homebrew cask (#339) (@optimalone)
346feee3bbbe35bc9507612c91431c2def543914: Enhance GoReleaser with build metadata and security improvements (#338) (@optimalone)
Nothing published for this version
Nothing published for this version
e1964152da1598b7f42964a883b7a92c1ad52c7a: Fix deprecated config for GoReleaser GHA (@owenthereal)
action-upterm instruction (@owenthereal)Nothing published for this version
Nothing published for this version
Nothing published for this version
One column per quarter.