jupyter-lsp

• bug fixes:
  • fix for potential data loss on invalid JP_LSP_VIRTUAL_DIR (#1140)

This is a hotfix release for jupyter-lsp (server extension) only.

To upgrade to this release:

1. Make sure your JupyterLab version is 4.1.0 or newer and Python version is 3.8 or newer.
2. Update the extension:

   pip install jupyterlab-lsp==5.1.0 jupyter-lsp==2.2.5 'jupyterlab>=4.1.0'
   # or, for conda:
   # > Please note that conda packages may take a day or two since release before becoming available!
   # conda install -c conda-forge jupyterlab-lsp=5.1.0 jupyter-lsp=2.2.5 'jupyterlab>=4.1.0'
   

3. If installing this extension for the first time:
   • please read the full installation instructions as language servers of your choice need to be installed too, and additional configuration can make your experience smoother,
   • if you wish to use jedi-language-server or python-lsp-server, please make sure to upgrade IPython to 7.20 or newer.

Changelog

jupyter-lsp 2.2.5

• bug fixes:
  • fix for environment variables leaking into the parent environment (#1078)

This is a hotfix release for jupyter-lsp (server extension) only.

To upgrade to this release:

1. Make sure your JupyterLab version is 4.1.0 or newer and Python version is 3.8 or newer.
2. Update the extension:

   pip install jupyterlab-lsp==5.1.0 jupyter-lsp==2.2.4 'jupyterlab>=4.1.0'
   # or, for conda:
   # > Please note that conda packages may take a day or two since release before becoming available!
   # conda install -c conda-forge jupyterlab-lsp=5.1.0 jupyter-lsp=2.2.4 'jupyterlab>=4.1.0'

3. If installing this extension for the first time:
   • please read the full installation instructions as language servers of your choice need to be installed too, and additional configuration can make your experience smoother,
   • if you wish to use jedi-language-server or python-lsp-server, please make sure to upgrade IPython to 7.20 or newer.

Changelog

jupyter-lsp 2.2.4

• bug fixes:
  • fix websocket handler incorrectly inheriting from APIHandler rather than JupyterHandler (#1069)
  • remove unused notebook config entry point (#1069)
  • support latest version of typescript-language-server (#1064)

• maintenance:
  • updates pyright config schema to v1.1.350

• bug fixes:
  • address warning about renamed extension_points (#1035)
  • fix compatibility with jupyter server 1.x
  • fix an authentication-related security vulnerability (see the advisory for details)
• enhancements:
  • add authorization support (lsp resource, jupyter-server v2+ only) - this allows server operators for fine grained access control, e.g. in case if specific users (such as guest or read-only users) should not be allowed to access LSP; this is in addition to authentication fixes

• bug fixes:
  • use APIHandler over JupyterHandler to get CORS OPTIONS #952 (thanks @zhanba!)
  • use shutil.which to discover npm executable on Windows (thanks @jameshurst!)
• maintenance:
  • resolve traitlets type warnings, lint, remove six #1015
  • use sys.executable in stdio tests #998

• bug fixes:
  • await sleep() coroutine (#939, thanks @jinzhen-lin)
  • limit attempts to initialise shadow file system to three trials (#936)
• maintenance:
  • support bash-language-sever 4.3.2+ (#938, thanks @ackalker)

This release improves jump to definition function (bringing "click to jump" and "jump back" functionality) along with multiple bug fixes and quality of life improvements. Please see the CHANGELOG.md for details on the improvements in this version.

To upgrade to this release

1. Make sure your JupyterLab version is 2.2

2. Install/update LSP packages:

pip install jupyter-lsp==0.9.3
jupyter labextension install @krassowski/jupyterlab-lsp@2.1.0

If you are installing this extension for the first time, please read the full installation instructions as language servers of your choice need to be installed too and additional configuration can make your experience smoother.

Many thanks to the code contributors: @fcollonval, @bollwyvl, with special highlight of first-time contributors: @martinRenou, @karlaspuldaro, and @mnowacki-b. Thank you!

A minor release to fix the LaTeX server support.

To upgrade to this release:

1. Update JupyterLab to 2.2 version

2. Install/update LSP packages:

pip install jupyter-lsp==0.9.2
jupyter labextension install @krassowski/jupyterlab-lsp@2.0.1

This release requires JupyterLab 2.2.

This release introduces many features and bugfixes, importantly:

• support for SQL:
  • autodetection of sql-language-server (note: works best with Node 11+)
  • support for ipython-sql magics
• syntax highlighting adopting to the cell magics in IPython notebooks #319
• completer improvements:
  • documentation preview (#301, #315)
  • icons for completion item kinds (two themes: vscode and material available by default)
  • continuous hinting/hinterland mode (#315)
• diagnostics can now be ignored (by code or message regexp), or copied from the diagnostics panel (#330)
• several fixes to the rename feature
• UI improvements, and addition of icons for each of the features (#318)

Please see the CHANGELOG.md to see all the added features and bug fixes.

To upgrade to this release:

1. Update JupyterLab to 2.2 version

2. Install/update LSP packages:

pip install jupyter-lsp==0.9.2
jupyter labextension install @krassowski/jupyterlab-lsp@2.0.0

Overview

Completer improvements

• New completer icons

• Documentation panel and continuous hinting (Hinterland mode)

Statusbar improvements

• New statusbar icon

• Status popover icons restored & the document locator widget instead of document ids in the popover:

Settings for multiple features added

Diagnostics	Completion

Icons in the context menu

Syntax highlighting in cell magics

before	after

Context menu actions in diagnostics panel

• documentation improvements:
  • document troubleshooting steps for texlab server(#702)
• maintenance and upkeep:
  • migrate test configuration to ServerApp as needed (#713)
  • address deprecation warnings (#713)

• features:
  • add support for new typescript-language-server replacing javascript-typescript-langserver; despite the name both packages provide support for all four: JavaScript, JSX, TypeScript and TSX; the old javascript-typescript-langserver can still be used, but it is no longer maintained and we will not be supported, and specs may be removed in the next major release (#697).

• bug fixes:
  • remove spurious ValidationError warnings for non-installed servers (#645, thanks @karlaspuldaro)
  • reduce number and verbosity of logs on startup

• features:

  • troubleshoot property was added to the language server spec, allowing to describe auto-detection troubleshooting (#634)
  • new endpoint specs will list all language server specifications known to jupyter-lsp allowing frontends to suggest installation of specific language servers (#634)

• changes:

  • ShellSpec.is_installed() signature changed; it now accepts the LanguageServerManagerAPI rather than the resolved command location (of str type); the specs using only is_installed_args are not affected; as this method was only used by internally by the __call__ implementation (which was adjusted accordingly) this change should not break existing specs unless any of these methods were overridden in sub-classes.
  • SpecBase was moved to types.py; it can still be imported from utils, but doing so is discouraged
  • ShellSpec.solve() was added to facilitate discovery of command location

• features:
  • add auto-detection of pyright server (#587, thanks @yuntan)

• maintenance:
  • updates to API with respect to null/undefined values in course strict null checks activation ([#733])

• bug fixes:

  • ensures jupyter*_config.d paths are searched for language_servers as documented in Configuring (#535)
  • uses more explicit file name for enabling jupyter-lsp in notebook and `jupyter_server (#535)

• features:

  • add config for the classic notebook server extension (#504)

This release supports JupyterLab 2.0 and 2.1 but not 2.2 and is the last release to support 2.1.x version of JupyterLab.

This release introduces support for LaTeX (note: it requires more configuration than other servers, see the documentation) and a patch aimed at interoperability with Kale (#299).

Please see the CHANGELOG.md for the details.

To upgrade to this release:

1. Update JupyterLab to 2.1 version

2. Install/update LSP packages:

pip install jupyter-lsp==0.9.1
jupyter labextension install @krassowski/jupyterlab-lsp@1.1.2

Note: 1.1.1 was skipped to ensure that the correct version of all files is uploaded to npm.

• bug fixes:

  • PythonModuleSpec no longer raises exception when the server module does not exist (#485)

This release supports JupyterLab 2.0 and 2.1 but not 2.2. This release brings support to modify the language servers' configuration in the Advanced Settings Editor and many bug fixes.

Please see the CHANGELOG.md for the full list of changes.

To upgrade to this release:

1. Update JupyterLab to 2.0 version

2. Install/update LSP packages:

pip install jupyter-lsp==0.9.0
jupyter labextension install @krassowski/jupyterlab-lsp@1.1.0

This release supports JupyterLab 2.x but not JupyterLab 1.x. Starting from this release we also have online documentation at jupyterlab-lsp.readthedocs.io.

Please see the CHANGELOG.md for the full list of changes.

To upgrade to this release:

1. Update JupyterLab to 2.0 version

2. Install/update LSP packages:

pip install jupyter-lsp -U
jupyter labextension install @krassowski/jupyterlab-lsp@1.0.0

• features

  • the virtual documents' folder can be configured with JP_LSP_VIRTUAL_DIR or LanguageServerManager.virtual_documents_dir, with a potential benefit for JupyterHub installations (the default value remains contents.root_dir / .virtual_documents) (#416, thanks @fcollonval)

• autodetects the sql language server for .sql files (#328)
  • diagnostics are provided by sqlint which requires Node 11+ to work well (in contrast to currently required Node 10+).

• autodetects the texlab language server for .tex files (#288)
  • diagnostics should be provided by chktex on save, but don't yet appear, but can be configured through the Advanced Settings Editor to appear on save or change

• features

  • language servers can now be configured from the Advanced Settings Editor ([#245][])

• bug fixes

  • handles document open and change operation ordering more predictably ([#284][])

This is the last version for JupyterLab 1.x. A new version for 2.x version will be released soon.

Please see the CHANGELOG.md for the full list of changes.

To upgrade to this release use:

pip install jupyter-lsp -U
jupyter labextension install @krassowski/jupyterlab-lsp@0.8.0

Provides major new features:

• renaming variables, functions, etc. in notebooks and files (see GIF below),
• diagnostics panel for sorting and jumping to the inspections (see GIF below),
• a statusbar popover with the current status of LSP servers

and many bugfixes and stability improvements, thanks to much higher browser test coverage.

Please see the CHANGELOG.md for the full list of changes.

To upgrade to this release use:

pip install --pre jupyter-lsp -U
jupyter labextension install @krassowski/jupyterlab-lsp@0.7.0

• features
  • adds a language server status endpoint ( #81 )
  • adds more descriptive information to the language server spec ( #90 )
  • adds an extensible listener API ( #99, #100 )

• features

  • starts language servers on demand
  • accepts configuration via Jupyter config system (traitlets) and python entry_points
  • autodetects language servers for bash, CSS, LESS, SASS, Dockerfile, YAML, JS, TypeScript, JSX, TSX, JSON, YAML

• bugfixes

  • fix issue that variables declared in cell magics(%%time, %%capture) are masked( #635 )