NewYour coding agent can read the release notes before it upgrades.Set up the MCP server →
Go modules
Go modules, #1801 by repository stars
Latest stable
v1.17.0
Last release 15 days ago
07 Nov 2026
Ships on a steady schedule
a new release about every 9 days
Nearly every release is documented
notes for 60 of the last 60 stable releases
Nothing withdrawn
no release was ever pulled
4 months old
108 releases · first in 2026
Drag across the ruler to compare, or tap a release to open it.
Nothing published for this version
整合 PR #300:新增 sch geometry / schematic.geometry.read,按需读取当前页 part 几何与导线;NC 按当前页 ID 与位号唯一定位,保留完整器件读取与 marker 指纹路径。几何读取失败独立报告 SCHEMATIC_GEOMETRY_READ_FA
sch geometry / schematic.geometry.read,按需读取当前页 part 几何与导线;NC 按当前页 ID 与位号唯一定位,保留完整器件读取与 marker 指纹路径。几何读取失败独立报告 SCHEMATIC_GEOMETRY_READ_FAILED,保留 mutationApplied/partial,完整读取使用统一预算,显式短诊断预算仍有效。scope/effect/confirmation/verification/batch 契约,几何读取声明只读 access。x/y。sch compose schema 从真实输入类型导出 schema;skill read 按阶段提供实际正文、版本与 SHA256,缺章或路径越界时拒绝。schema 和正文读取不代表设计正确或规则已执行。project delete 按 UUID、名称、team 与库存预检并拒绝当前活动工程;经明确确认后仅调用一次官方内部 API,再以新回读核验。宿主不支持时明确拒绝,不盲目重放不确定的删除。daemon serve-isolated,使用显式测试端口和全新绝对路径状态目录,隔离 PID、审计与资产;端口占用时拒绝启动,不替换现有实例。debug logs 只读返回带 [easyeda-agent] 标记的连接器日志,日志不可读、结构或元数据缺测时报错。daemon serve-owned --port N --owner-id UUID:使用显式 loopback 端口,stdin 关闭或读取失败时退出;端口占用时拒绝启动,不替换已有实例、不写共享 PID 文件、不同步 Skill。daemon stop 可检查预期 PID、版本和实例。这些检查不构成原子停止协议,仍保留 OS signal 停止的非原子边界;托管宿主正常退出应关闭自己持有的 stdin 管道。Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Acceptance report, baseline and test cases: test-evidence.zip (SHA256 in checksums.txt).
Your coding agent can read these notes before it upgrades. Set up the MCP server →
One column per month.
原理图文本创建的 DEV 候选预览版,供检查和测试;正式 Latest 仍为 v1.16.0。
原理图文本创建的 DEV 候选预览版,供检查和测试;正式 Latest 仍为 v1.16.0。
新增 easyeda sch text create 和类型化动作 schematic.text.create,支持中文、多行说明。固定原理图身份,只创建一次,并通过新鲜回读核对稳定新 ID;不确定或 partial 结果报失败,不自动重试或删除。已有读取、移动、审批和保存重载要求保持。
包含五个平台 CLI、配套连接器、Skill、安装脚本和 checksums.txt,版本统一为 1.17.0-dev.1。使用前核对校验清单与精确源标签;本次发布未执行安装脚本或改动运行环境。
来源:PR #301 合入后远端 dev 固定修订 477c97ed3e8c132f35aa4a48e6f7a656b702b91e;不包含本地另一项未发布清页修复。
验证:PR 基线文本 CLI 13 项、protocol 223 项、连接器文本 44 项通过;早期实现基线全套 Go 6085、连接器 1375、Desk 121 及候选目录的 7 个模拟接入场景通过。TypeScript、构建、Skill 校验通过。PR CI 五个任务全部通过,包含 macOS、Windows、Linux 安装面。固定 dev 的最终打包和离线发布冒烟通过,10个远端文件大小与SHA256一致,连接器及校验清单匿名下载一致。
限制:未进行真实原理图的新建、保存重载及删除清理验收,未验证完整电路设计;未更新已安装 App 或 daemon。当前 EdaDesk 升级器仅接受正式工具版本,本预发布是独立工具候选包,尚非 App 内一键预览。后续 DEV 候选接入仍须保留产品内具体版本、端口及 PID 的人工确认。
发布事件已验证:版本检查成功,正式 SkillHub 发布任务跳过。未更新正式 App 槽位、正式 Latest 或第三方 registry。
修复 PR:https://github.com/zhoushoujianwork/easyeda-agent/pull/301
DEV 预览 v1.17.0-dev.1 · 原理图文本创建 Pre-release
Pre-release
Compare
easyeda sch text create 与类型化动作 schematic.text.create,支持创建后精确 ID 回读及不确定写入保护。1.16.0 正式包,也不代表完整设计验收通过。Nothing published for this version
原生 CBB:新增官方库搜索、身份核对、归档导出,以及受控个人库样件创建、符号构建与放置;按当前工程目录解析本地 type 17 符号,写后必须回读为真实 block_symbol。修复已接块端口被展开网表缺席误报的问题,保留悬空端口和普通器件检查。
原生 CBB:新增官方库搜索、身份核对、归档导出,以及受控个人库样件创建、符号构建与放置;按当前工程目录解析本地 type 17 符号,写后必须回读为真实 block_symbol。修复已接块端口被展开网表缺席误报的问题,保留悬空端口和普通器件检查。
CBB 符号库存覆盖默认 Rectangle,拒绝把含图形目标误判为空;提供精确矩形清理入口,核对归属、几何、保留引脚与 polygon 和显式保存。专用 createCbbSymbol 仍可能只返回未落地 ID,支持路径为已验证的官方通用符号创建。
PCB 制造导出:新增官方 Gerber/坐标文件导出,绑定导出前后 PCB 身份及官方文件哈希;校验实际内容并正确处理 UTF-16 表格坐标文件,不把文件扩展名或下载成功当作内容有效。
导图与布局:官方 SVG 导出支持经校验的内嵌静态 SVG;区分 PCB 图面审查与布线验收,避免批量检查反复打开活动文档。密集电源布局在冻结候选预算内求解,不放松保护判据。
宿主弹窗:公开 Skill 要求操作后主动检查、已有授权内精确应答、检查下一层提示和迟到写入,再做 typed 数据回读;这是操作流程改进,未新增通用自动弹窗应答 CLI。
发布目标修正为 SkillHub 的公开条目;外部平台的上传回执与公开可下载安装结果分别核验,不把审核中的版本当作已上线。
pcb.pour.create / easyeda pcb pour now accept a closed native L/ARC polygon source as an alternative to points. Signed arc sweeps remain native in the pour boundary; exact-ID fresh readback checks segment type, endpoints and sweep (including rotated/reversed encoding) before copper rebuild. Malformed/open paths and mixed inputs fail before mutation. Web 4.1.78 定向现场验证通过:双 ARC 圆、ARC+L 半圆、混合 L/ARC 轮廓及原有 points 矩形均生成实际铜,保存重载后精确 ID 边界与铜对象回读一致,原生 DRC passed:true、0 违例;开环与零弧度输入拒绝且未新增铜皮。宿主实际返回反向轮廓;单轮廓数组包装及重复闭合点仍只有离线回归覆盖。本结论限于独立测试板,不代表完整设计 E2E 或任意板卡验收。
Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Acceptance report, baseline and test cases: test-evidence.zip (SHA256 in checksums.txt).
本版修复首次安装时内置 CLI 无法提供托管 daemon 生命周期的问题。0.1.10 已公开的版本资产保持不变;本版使用独立版本号和资产,实际发布状态仍以固定 main 修订的双平台制品及公开更新清单为准。
daemon serve-owned 能力及原生 strict composition/connectivity schema。历史 v1.16.0 的窄兼容适配保持原样。本版继承 0.1.10 的验收边界,不将旧版测试结果自动转移至新包;延时摄影仍不包含在本版。CLI 临时端口探测不等于完整分发 App、Windows 桌面操作、真实工程、人工组件升级确认或收付款验收。macOS 包仍为 ad-hoc 签名、未公证;Windows 包仍未进行代码签名。真实双平台制品与专项验收分别记录。
Nothing published for this version
Nothing published for this version
PCB 焊盘回读新增钻孔与金属化:pcb.components.list --includePads 的每个焊盘带原样的 hole(["ROUND", d, d],10 mil 单位)、metallization 与 availability.hole,pcb dump 保留这两项。pcb encl
pcb.components.list --includePads 的每个焊盘带原样的 hole(["ROUND", d, d],10 mil 单位)、metallization 与 availability.hole,pcb dump 保留这两项。pcb enclosure plan 改为按真实孔径识别安装孔(≥ 2.1 mm 且焊盘无信号网络,按孔径选 M2–M6),不再按位号 H/MH 猜——真板上 H1–H4 常是排针;缺孔数据的旧 dump 只按 HOLE/MOUNT 封装名兜底并警告。ceshi 现场回读 111 个焊盘均带孔信息。sch list --include-pins(schematic.components.list)的位号撞号判断(#136)改由当前原理图的网表决定:同一位号在网表里对应多条器件记录才标 netAmbiguous。此前用 getAll(undefined, true) 比较器件身份,范围是整个工程已加载的图页;工程里有多套原理图且同位号器件不同时,会把真实器件的引脚网络全部置空,而且结果取决于页面加载顺序。2026-10-23 开源 RK3568 工程(V0.3 / V1.0 两套原理图)现场:V1.0 的 PMIC U11(4 个子部件、69 脚)全部读成空网络,官方网表导出显示正常连接;先读过 V1.0 后再重读 V0.3,V0.3 的 U11 也变空。同一原理图内网表有两条同位号记录时,旧逻辑不报歧义而是混合两颗器件的网络,现在会标出。连接器 1.14.5 在 edadesk 新开的 RK3568 窗口按原出错顺序只读复测(V0.3 PMIC 页 → V1.0 PMIC 页 → 重读 V0.3):三次 U11 都不再标歧义,三页逐脚与官方网表导出一致(288/288、298/298、288/288)。同一原理图内真实撞号的现场形态(网表里两条同位号记录)尚无现场样本,只有离线测试覆盖。easyeda pcb enclosure plan|build(纯离线,不新增连接器动作):由 pcb dump 与 pcb 3d models 推导可编辑的外壳参数(沿板框或矩形、上下壳与止口、安装孔螺丝柱、板边连接器侧开口、--top-cutout 开孔、--height 高度覆盖),再栅格化生成上下壳 STL;build 检查器件与板体干涉、网格闭合流形与体积一致,任一不过只写 manifest 并非零退出。EDA 内置 3D 外壳无创建接口(现场画线/填充到外壳层均被拒),因此不写回工程。同期补齐:--type slide 推盖盒(含滑出路径检查)、上下壳自动卡扣、--pillar 手加螺丝柱、两件重叠检查、细于 0.8 mm 的结构警告、每次输出 preview.png、--step 输出 STEP(未经 CAD 导入验证)。plan 把间距小于 0.8 mm 的推导开孔合并成一个;推盖入口改从外形边开口,侧壁不再剩下细边。easyeda pcb 3d 命令组(器件 3D 模型基础操作):models 只读列出每个器件的绑定模型、摆放(3D Model Transform 尺寸/旋转/偏移)、Height 与覆盖计数,--missing 只看未绑定;transform(pcb.model3d.set_transform)按轴修改单个器件的模型摆放;bind(pcb.model3d.bind)把单个器件实例换绑到库中已有模型;export-shell(pcb.export.3d_shell)导出官方外壳编辑器里设计的外壳(STL/STEP/OBJ)。写入只改目标键、重申位号、不写投影键,回读有其他变化即 partial 并附写前值。Web 4.1.78 现场验证:写命令经保存重载回读与导出 OBJ 几何核对(偏移 Z 严格验证),外壳仅验证了未设计时的报错。PROJECTED_STATE_KEYS 移至 projected-keys.ts 供复用。editor.panels(easyeda editor panels --left open|closed --right open|closed):用官方 sys_PanelControl 收起/展开左右侧栏,只改界面不改工程。SDK 读不到侧栏开合状态,结果报告实际调用和锁定状态;锁定的侧栏如实报告、不解锁。配合 view fit 居中展示。board.new(easyeda board new --project <uuid> [--name]):空工程起步,在当前工程新建组合并在其中建原理图(至少一页)和 PCB。按宿主可接受的顺序(游离原理图 → 绑定组合 → 建 PCB → 补首页 → 改名)执行,任一步失败按逆序删除本次已建部分并报告;以新回读的组合与文档列表判定 verified。board.delete 现在真正删除组合绑定的 PCB 与原理图(全部图页):平台 deleteBoard 只解绑,2026-10-21 ceshi 实测删后 PCB 与原理图页都还在。解绑后用 deletePcb / deleteSchematic 显式删除,结果按新的文档回读报告 deleted[] 与 residual[],有残留即 partial、CLI 非零退出;--dry-run 先列出将删文档,--keep-documents 保留旧的只解绑行为。pcb.document.delete(easyeda pcb doc-delete --uuid --expected-name):删除一份未绑定的 PCB 文档,按精确 UUID + 名称预检,拒绝仍被 Board 绑定的 PCB,删后回读确认不再列出;复用模块 PCB 连带删掉的文档报告在 alsoDeleted。easyeda board delete / pcb doc-delete 删除验证通过后刷新官方工程树:官方 SDK 没有刷新工程树的接口,删掉的文档在重载页面前一直挂在左侧树上。现在保存前台文档 → 重载整个 Web 页面 → 恢复原前台文档并回读,结果报告 treeRefreshed / treeRefresh;刷新失败单独报告、不把删除判失败;dry-run、--keep-documents、partial 不刷新,--no-tree-refresh 可关闭。sch list --include-pins 等读引脚网络的命令)后,连接器要求宿主连续空闲 150 ms 才返回(#256/#257):宿主在导出 promise 完成后 7–21 ms 才启动 RealTimeSync,原先只采样一次空闲就返回,紧随其后的 sch modify 会被拒(cmdKey),no-connect --clear 会不生效。Web 4.1.78 前台实测:读引脚后立刻 modify 由 7/80 失败降到 0/40,立刻清 NC 由 19/35 降到 0/20;读引脚的代价约增加 0.2 秒。pcb rip-up 的过孔范围排除封装内嵌过孔(QFN 散热焊盘),与 pcb clear 一致;此前整板 rip-up 会把它们放进删除批次。pcb check via-in-pad 改按焊盘真实矩形判定过孔铜是否压上焊盘:此前把焊盘当成以最长半边为半径的圆,距 SOIC 长焊盘 12.5 mil 的 dog-bone 过孔也被报。pcb autoroute 默认改用官方路由器:新 typed action pcb.route.auto 调 eda.pcb_Document.autoRouting(@beta,Web 4.1.78 现场可用,与原生「自动布线」对话框同一引擎、无弹窗)。已有导线/过孔一律保留,支持 --net、--ignore-net、--layers、--corner、--optimize、--timeout;返回路由器逐网结果、新建铜计数、被删图元与丢失的锁定铜,锁定铜丢失时命令失败;画布未变且有失败网时报错(路由器 success:true 只表示已启动)。外部引擎改为 --router / FREEROUTING_CMD 显式启用。pcb pour-fit --replace 只清同网同层的铺铜:此前按网清,先铺 TOP 再铺 BOTTOM 会把 TOP 的 GND 铺铜删掉。pcb clear:封装内嵌过孔(QFN 散热焊盘的 <器件id>e<n>)不再进入过孔删除批次——它们随所属器件一起删除或保留,过孔接口删不掉它们,此前整批报错使干净的板也报 failed:["vias"];返回 skippedEmbeddedVias 计数。用 --project 调用时,verify 流程的重载钉住实际应答的窗口,不再因窗口参数为空而判为窗口不一致、跳过二遍清板和最终计数。navigator.userAgent,daemon 在 health.windows[].host 输出 {kind,userAgent}(edadesk/electron/browser/unknown);AMBIGUOUS_PROJECT / STALE_WINDOW 详情列出各候选窗口宿主。同一文档的浏览器与 edadesk 窗口不再被当作重载残留静默择一,只有 UA 相同的注册才按重复取最新。pcb export-3d(pcb.export.3d):经官方 beta get3DFile 导出绑定板版本的真实 PCB OBJ/STEP,前后完整板回读核对身份与语义哈希,保留官方文件(含 ZIP)并校验字节、哈希与网格。pcb neckdown-plan(进焊盘一段改窄)、pcb teardrop-plan(原生泪滴无创建接口,按考试允许画线条形泪滴,--remove-from 按旧计划删除)与泪滴尺寸修改规划、pcb silk-plan(按实测字框排位号与接口提示);泪滴规划与修改共用同一间距默认值(取 clearance 与 track-track 较大值 +0.5)。modifyBoardName 对新建组合既返回过 false,也返回过 true 而名字未变。board new --name 按新回读的组合列表决定实际名字,未生效时结果为 partial 并带 requestedName 与 notApplied:["name"],CLI 非零退出(此前只给警告、仍报完全成功,或把未生效的名字当作结果);board rename 只有回读出现新名、旧名消失才 ok:true,否则 CLI 非零退出,hostReturned 保留宿主原始回答。Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Acceptance report, baseline and test cases: test-evidence.zip (SHA256 in checksums.txt).
Nothing published for this version
原理图功能框(#43):块数据新增 schematic_layout.tiles,多脚主控按参考原理图排法——核心芯片独占一框只挂引脚标签,外围按功能各成一框、框内直连,框间用同名标签。blocks.Get(" #<框>") 由块数据确定性派生出每个框;sch block-apply 逐框执行,核心
原理图功能框(#43):块数据新增 schematic_layout.tiles,多脚主控按参考原理图排法——核心芯片独占一框只挂引脚标签,外围按功能各成一框、框内直连,框间用同名标签。blocks.Get("<id>#<框>") 由块数据确定性派生出每个框;sch block-apply 逐框执行,核心落在 --at,其余框按阅读顺序找第一个连分区框都放得下的位置,也可用 --tile-at 框名=x,y 指定。每框可写 title 作分区框标题。ESP32-S3R8 芯片级块改为 5 框形态。
网络标签:block-apply 的信号网默认用原生网络标签(块里写 signal_marker: netport 可退回六边形端口);同一列统一桩长、不错开;末端挂标签的干线画成不带网名的导线,网名不再显示两次。移动与重建补连信号时同样用网络标签。
竖向引脚上的网络端口先沿引脚引线再横挂(连接器 connect_pin 新增 via,整段一根折线);autoconnect 新增三项检查:桩线穿过已有标记、标签(含符号自带短引脚)压在导线上、挡住未接线邻脚的出线口。
整体移动:group-move / zone move 的移动内核把只接本次同一位移件的导线树按位移原样重建,连同线上网络标签,框内直连线(晶振负载电容)不再被拆成标签;连接器 schematic.group.move 也会重挂线上网络标签。
分区框之间至少留一个 gutter(12)的间距,zone-plan 收紧与校验、排框共用一把尺;违规提示的位移量计入间距。
后台标签页:连接器等待原理图同步时按当前请求剩余预算等待,不再固定 5 秒后要求切到前台;block-apply 调 autoconnect 时不再读取引脚网络(避开网表导出后的拒写窗口)。
peripheral-not-direct:只含 2 脚件的功能框(去耦排、上拉排)不要求直连核心。
自动找空位优先让标签外圈也留在图纸内,找不到干净位置时退回本体口径。
CLI:整网被导线接住的端口网,其标签落点改用 autoconnect 同一打分(planConnection)在干线末端与沿干线各网格点(垂直引出)中挑一个逐项无隐患的位置(不穿件、不压件、不压标签),不再无条件挂在线端;现场 IO0 标签不再压 C7(sch check WARN 10→8)。
CLI:autoconnect 把超出图纸可用区(图纸内缩 12)的标签候选与压图签一样硬拒,不再把错位到外层的标签画出纸面(现场 W25Q64 右侧两支标签 out-of-sheet ERROR → 0)。
CLI:原理图直连只覆盖简单外围(阻容、晶振、磁珠等)——块内另一颗 IC/连接器/模块的引脚按规范用网络标签解耦示意(bapDirectWireScope),求解器也只为将直连的简单外围脚省去标签通道;sch check 的 peripheral-not-direct 同样只要求 ≤4 脚的外围直连。sch block-apply 写前硬门回读改为 includePinNets:false(只用几何),不再触发网表导出——此前紧随其后的 wire.create 会被宿主整批拒绝(#256,现场 22/22)。现场 ESP32-S3R8 块:16 根直连、Flash 走标签、16 网与实时网表一致、peripheral-not-direct 通过、退出 0。
CLI:sch block-apply 干线/单弯接不上的块内非地成员改由 lib-layout 的 A* 正交绕线器兜底(kind maze,适配层直接用执行端的实测场景、不重读网表),并放行不导通的十字交叉(与 schguard.SegmentsContact 同一把尺;端点相接、T 接、共线重叠仍拒);迷宫阶段为还要接标签的块内引脚预留 20 raw 引出位;同网先前一根线下发失败时,T 在其上的分支/迷宫线不再下发(防悬空短线被当作已接)。求解器不再给将用导线直连的块内两脚专线核心脚预留标签通道,Flash 贴到 SPI 脚旁。现场 ESP32-S3R8 芯片级块:22 根直连(9 根迷宫)、16 网与实时网表一致、退出 0;Flash CLK 仍为标签(迷宫单次节点上限)。
CLI:sch block-apply 把 attach 外围按「干线」用真实导线接到所贴核心脚(竖放 2 脚分立件挂在核心脚引出方向的干线上,同一只脚的件共用一棵线树);证不清白的成员退回同名标签并逐条写进 manifest wiring.fallback。现场 ESP32-S3R8 芯片级块:14 根干线全部画上、16 网与实时网表一致(去耦、EN/IO0 RC、晶振与负载电容);Flash 多脚信号仍为标签。修复的几何根因:竖放阻容引脚连接点离中心实测 20(原按 10,落线被吃掉);回读坐标的浮点噪声改为圆整后判定;下发前去掉重复点(宿主拒绝零长度线段)。
CLI:20 处只用引脚几何的原理图回读(sch connect --pin 目标解析、块内直连、移动内核、zone move/tidy/arrange/plan、group move/arrange/tidy、autolayout、destagger、clusters、marker 几何、layout-score)改为 includePinNets:false,不再顺带跑网表导出——导出后紧跟的写入会被宿主以 cmdKey 拒绝(#256/#257)。需要引脚网名的读取(autoconnect 幂等、外围直连、compose/design-diff 对账、gate 导线交叉、block-apply 写前硬门、power-layout 回放断言)保持不变。
Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Acceptance report, baseline and test cases: test-evidence.zip (SHA256 in checksums.txt).
Nothing published for this version
CLI:easyeda update 换完二进制后自动在后台重启仍在跑旧版本的已安装 daemon(--restart-daemon,默认开启,启动参数回到默认),报告新增 daemonRestart;任何命令发现已安装的 daemon 比当前 CLI 旧(安装脚本、包管理器升级后)也会自动重启它。
easyeda update 换完二进制后自动在后台重启仍在跑旧版本的已安装 daemon(--restart-daemon,默认开启,启动参数回到默认),报告新增 daemonRestart;任何命令发现已安装的 daemon 比当前 CLI 旧(安装脚本、包管理器升级后)也会自动重启它。make dev 等源码构建的 daemon 一律不动。思路来自 #278(@XianD7),按 v1.12.0 已有的按需后台启动收窄实现,不引入系统服务注册。Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
CLI:关系块 sch block-apply 的预留包络按行折返、在锚件上下交替,外围件多的块不再被预检误判放不下;实测引脚下原位解不开时,锚件平移到最近可整块解开的位置。求解前的引脚回读改为 includePinNets:false(只要几何),不再跑网表导出,紧随的锚件平移不再被宿主以 cmd
sch block-apply 的预留包络按行折返、在锚件上下交替,外围件多的块不再被预检误判放不下;实测引脚下原位解不开时,锚件平移到最近可整块解开的位置。求解前的引脚回读改为 includePinNets:false(只要几何),不再跑网表导出,紧随的锚件平移不再被宿主以 cmdKey 拒绝(ESP32-S3R8 芯片级块现场整块落图、16 网与实时网表一致;外围仍以网标签相连,peripheral-not-direct 照常报出)。sch zone-draw / zone move / zone-plan 清除分区框改走 typed schematic.primitives.delete 逐个删除并等落定回读(复用 deleteVerifiedOneByOne),不再在 exec_js 里删完立刻回读——未落定快照曾把刚删的框报成 survived,使 zone move 重画框间歇失败。sch clear 与 sch export-image 派发预算改为 120s / 90s;后台标签页里的密页此前在 20s 处报 DISPATCH_FAILED 而实际已落地。sch export-image 未给 --format 时按 --out 扩展名推断,冲突时拒绝,不再把 SVG 写进 .png。pcb.route.delete:封装内嵌对象改按「父器件 primitiveId + 自身 e<数字> id」判定,不再只看 ID 前缀;顶层走线/过孔的 ID 恰好以某器件 ID 开头(如器件 e2、走线 e200)时不再被误拒为 footprint-embedded。真正的 EPAD 热过孔仍拒删(ceshi 实测 ESP32-S3R8 九颗热过孔)。baselineFindings + 警告),不再让局部 ECO 写后被判失败;新增、改变或重复次数增加的问题与缺测仍失败。library.symbol.build / library.footprint.build(#279):打开编辑器前先核对资产在 --library 指定的库中;不在时若能在工程库/个人库找到,以 PRECONDITION_REFUSED 拒绝并给出正确的库(宿主对工程库资产的记录把 libraryUuid 写成个人库 uuid,照抄该字段即失败),不再报 INVALID_STATE 并被计入退化。焦点确认同时接受该库的两种名称,修复工程库符号 build 在前后台都必然失败;activateDocument 的布尔返回不再作为判据,焦点等待改为按 4s 总时长。library.footprint.build(#279):焊盘 shape 写入前按官方元组校验(类型须为 "RECT"/"ELLIPSE"/"OVAL"/"NGON"/"POLYGON" 字符串,元素个数与尺寸正确),数字类型 [1, w, h] 不再在写入中途失败;Skill 示例同步改为官方写法。工程库封装的编辑器 API 打不开(4.1.71 实测),build 改为明确拒绝并指引建在个人库。pcb group create/add/remove/ungroup/list/move(#173,mode: virtual——官方 API 不暴露原生组合):按 PCB 文档 uuid 持久保存、与原理图组共用数据模型;pcb group move 整组刚性平移并逐件回读核验;pcb modify/move/align/distribute/grid-snap/arrange 部分覆盖组时拒绝(--break-group 放行),auto-place/place-constrained/refine 把组成员当固定件;pcb delete 删除后把成员从组里摘除。pcb check 新增 connector-opening-inward(#231):贴边(300mil 外沿带)且块库声明了开口方向的插口,开口背对最近板边时报 WARN 并给出转 180° 的修法——此前插拔通道恰好空着时一条不报;连接器开口声明补 typec(不带连字符的 Type-C 名称,如 TYPEC-304-ACP16 / TYPEC-16P 此前匹配不到)。schematic.text.move(#212):按绝对目标用官方文本 modify 平移并逐条回读,不删不建;sch zone move 的文本步骤由 exec_js 删除重建改用它——宿主拒绝的文本原样留在原位(不丢、不重复),失败时给出可直接重跑的幂等载荷。unit 的规则内先映射到同一宿主标准形式再按机器舍入严格比较;无单位字段与超出网格的真实漂移仍判不符。schematic.components.list --include-pins(#244):网表可读但某器件或复用块实例在网表中没有记录时(块实例的端口只以实例前缀网名出现在真实器件上),改由触碰该引脚的导线网名解析,标注 netSource: wire-geometry;解析不到时给 netUnresolved(no-touching-wire / unnamed-wire / conflicting-wire-nets / not-in-netlist),不再静默返回与"悬空"无法区分的 null。schematic.page.clear 保留器件(#267):用官方 getAllPinsByPrimitiveId 把保留器件的引脚纳入父属闭包,引脚自有属性(Pin Name/Number/Type)不再被归为孤儿属性列入删除计划;引脚读不到时写前拒绝;每轮按完整属性状态(值、显隐、几何)核对保留属性,回包新增 preservedPinIds。页面快照与普通清页的孤儿判定共用同一父属分类(含引脚)。pcb.component.modify(#275):layer 接受 top/bottom(含 TOP/Bottom Layer 等写法)与 1/2,并在写入前换成数字层 id;此前宿主收下层名 "BOTTOM" 回执 ok 却不翻面,回读又把字符串层名记为"无法核对",批量翻面 68 件全部静默失败。非器件面取值直接拒绝;pcb modify --help 示例同步更正。health:写入健康度新增 lastFailureError(最后一次失败的错误码与信息)。Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Acceptance report, baseline and test cases: test-evidence.zip (SHA256 in checksums.txt).
CLI 接入:任何命令发现没有 daemon 时自动在后台启动(仅正式版本号构建,EASYEDA_NO_AUTOSTART=1 关闭;并发调用由启动锁保证只拉起一个),新增 daemon start --background;health 在 stderr 输出逐项体检清单(daemon、连接器、版
EASYEDA_NO_AUTOSTART=1 关闭;并发调用由启动锁保证只拉起一个),新增 daemon start --background;health 在 stderr 输出逐项体检清单(daemon、连接器、版本、宿主、工程与标签页)并给出下一步。--doc 钉页后读取不再每次前置探测当前文档,改为用回包上下文核对、漂移时重钉重发(pcb check 调用 87→19、sch gate 67→21);已同步的 pcb import-changes 明确提示"已同步,无需导入";decap-too-far 文案阈值与判据统一;pcb auto-place 外围按引脚就近双向找空位并避开禁布区与板外。pcb.silk.align:显式 side 在无碰撞且在板内时必定采用(原先 0.15 权重几乎不起作用);候选位必须离本器件比离任何其他器件都近,否则判 unresolved 且不写入,不再把位号放到别的器件旁边。schematic.visible_text.bboxes:当前页全部可见文字与可见属性(器件与图纸本身)的官方 bbox,量不到的列入 unmeasured;sch check 据此把越出纸张的可见文字/属性报 out-of-sheet(此前显示图签 Name/Description 会画到纸外而无规则发现)。schematic.power.connect_pin:网络标识创建超过 7s 后不再立即回滚桩线,而是在处理预算内继续等待同一宿主调用——晚到的标识被采用(lateSettle:true),明确失败才回滚;仍未落定时保留桩线并返回 partial:true/verified:false,避免晚到标识成为孤儿(#208)。document.current 无活动文档(全部标签关闭、doc reload/switch 中途)改报 PRECONDITION_REFUSED:这是状态不是宿主故障,不再计入写健康度、不再把连接器误标 DEGRADED;CLI 同时兼容旧连接器的 EDA_CALL_FAILED。schematic.component.place:器件库里查不到的器件(例如误传元件的 16 位符号 id 而非 32 位器件 uuid)在调用宿主 create 之前即以 PRECONDITION_REFUSED 拒绝——宿主对未知器件的 create 既不报错也不返回,会永久挂起并堵住动作队列。pcb silk-align 全部位号无解且回执证明未写入时,提示「nothing was written」并列出各位号原因,不再误报写入未验证。deadlines 的「setTimeout 快路径 + worker tick 保底」新增 sleep();此前后台超过约 5 分钟后 Chrome 把连续主线程定时器压到一分钟一次,导入等轮询必然超时。pcb.import_changes:点击「应用修改」后以器件清单变化为准判定已应用(后台标签页里确认框关闭动画会拖过 10s,原先误报 dialog-open/未核验,新增 dialogLagged:true 标注);导入后的稳定等待同时接受器件减少,删除型导入不再白等 10s。CLI 不再在后台拒绝 pcb import-changes 与 doc reload(后台实测:重载原理图/PCB 各 3 次全部通过,语义哈希不变,#276);health 对后台标签页只作备注不再告警;pcb.snapshot 后台拒绝时给出可直接执行的回读渲染命令(原理图用 sch export-image,后台可用)。Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Acceptance report, baseline and test cases: test-evidence.zip (SHA256 in checksums.txt).
pcb.import_changes:已同步的板子不弹确认框、导入接口直接返回 true 且器件清单不变时,判为已核验的空操作(新增 noChanges:true),不再按"未核验的部分导入"失败退出。
pcb.import_changes:已同步的板子不弹确认框、导入接口直接返回 true 且器件清单不变时,判为已核验的空操作(新增 noChanges:true),不再按"未核验的部分导入"失败退出。schematic.primitives.delete 支持 cascade:true:删除器件时连同其独占桩线与标识一起删除(与 component.delete 共用同一级联实现);sch prim-delete 默认开启,--no-cascade 关闭。schematic.bridgeCheck 不再把带网名的单脚桩线(--kind net_label,网名在导线 Name 属性上)误报为 ORPHAN。primitiveIds,不再回退到画布选中项。pageVisibility;EasyEDA 标签页隐藏时 pcb.snapshot 以 PRECONDITION_REFUSED 拒绝(画布不重绘,截图必然过期),原理图同步等待超时报错点明后台节流并给出修法。schematic.primitives.delete 必须给出 primitiveIds,不再删除画布当前选中项(选中项可能是用户手动选的,且该路径绕过 CLI 图框守卫);sch prim-delete 同步要求 --ids。schematic.select(sch select)与 view.fit_selection(view fit-selection)。sch check 按已登记模块用 compose 同一把尺核验外围实线直连(peripheral-not-direct,严格门禁失败),同名标签不再算直连;页面边界检查覆盖器件、标识与导线(out-of-sheet、导线穿图签)。pcb import-changes 默认不再回填器件库属性(--sync-attrs 显式开启),原生 DRC 不再报原理图与 PCB 网表不一致;sch page-delete 以回读页列表判定成败,平台假成功不再被当成已删除。--project 传工程 UUID 时与工程名共用同一份工作流状态,compose 登记的分组与分区框不再写丢;分区认领表点名本板没有的器件时整表判陈旧(zone-claims-stale),不再误报 zone-violation 或牵引摆件。pcb check 新增 silk-off-board、丝印压焊盘跳过隐藏文字;块 attach 外围贴脚成排、避开图签并留足标签通道;块内面对面两脚网直连导线;PCB dump 语义哈希做浮点归一,保存重载前后可比。project import 把原生工程归档导入为新工程;lib search 接受位置参数;审计条目记录发起调用的子命令;sch connect 默认沿引脚实测朝外方向出桩;文档类型不符的失败提示 --doc 而非误报连接器降级;删除未使用代码。Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Acceptance report, baseline and test cases: test-evidence.zip (SHA256 in checksums.txt).
Nothing published for this version
新增离线 project drawings:核验明确输入、图片有效性和哈希,保留官方图片原字节,生成图册、说明与 manifest。
project drawings:核验明确输入、图片有效性和哈希,保留官方图片原字节,生成图册、说明与 manifest。pcb layout render --actual 正反面实际回读渲染,支持非零板框原点、底面镜像和已读取焊盘;缺测项明确披露,候选图与实际图分开标注。doc ready、结构化 doc reload --json 和 sch attribute-move 纳入统一命令与回读流程;连接器更新后才能取得新增字段与动作。Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Acceptance report, baseline and test cases: test-evidence.zip (SHA256 in checksums.txt).
修复 DSH Git 插件安装时缺少 index.js 的分发缺陷(#274);入口仅导出无副作用的 Cordis apply,MCP 与 Skill 由 bundle patch 加载。
index.js 的分发缺陷(#274);入口仅导出无副作用的 Cordis apply,MCP 与 Skill 由 bundle patch 加载。Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Nothing published for this version
Nothing published for this version
Add schematic PNG/JPEG/SVG reference-image import and ID-based geometry management; fix image deletion and explicit intrinsic sizing.
Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Acceptance report, baseline and test cases: test-evidence.zip (SHA256 in checksums.txt).
Published on 2026-10-01: GitHub v1.9.0.
The annotated tag freezes commit feadb52bae1721acec52fbaf6de123e239bd4e08.
Independent limited-scope review, release-build and offline release-smoke passed.
All 11 remote assets matched local names, sizes and SHA-256; the Release is non-draft.
SkillHub workflow 36755633129
submitted skillId 173258 successfully; platform review status was not returned.
ClawHub confirmed easyeda-agent@1.9.0 publication (k97a2evwrtw4t6zxkm376s83kn8fd13n).
The JLC extension marketplace still requires manual submission and is not claimed updated.
This release adds schematic and PCB reference-picture import and management, fixes mirrored PCB preview bounds, and includes protected paperless composition improvements and updated PCB Skill guidance. PCB pictures are embedded on DOCUMENT layer 13; manufacturing silk contours are a separate capability. Users need the new connector for the image actions.
The user's 2026-10-01 approval limits acceptance to the verified images and this version's CLI changes. PNG/JPEG/SVG persistence and exact cleanup were tested on Web 4.1.60; full design E2E and bitmap-to-manufacturing-silk remain deferred, and #272 stays open. Earlier schematic-image/paperless evidence keeps its original runtime and limitations.
Acceptance report · Baseline · Test cases. Build and publication follow the release workflow.
Nothing published for this version
新增 sch layout-plan --net-labels:在用户明确接受标签连接时,各器件用短引线和同名网络标记连接,按完整包络分行布局;保留网表、引脚、NC、器件姿态与功能归属。
sch layout-plan --net-labels:在用户明确接受标签连接时,各器件用短引线和同名网络标记连接,按完整包络分行布局;保留网表、引脚、NC、器件姿态与功能归属。--unbounded 展开通道布局,保留器件间实体连线路径,允许合法 X 交叉,不限制区域/纸张尺寸;不同网端点/T 接触、共线重叠和遮挡仍拒绝。layout-plan --lib,直接读取原 lib-layout canonical 输入,输出可无纸张渲染的局部多区几何;结果和报告记录布局模式与原输入哈希。Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
2026-09-29 用户明确确认后,v1.8.1 已正式发布。
发布时间为 2026-09-29 01:11:58(UTC+8);annotated tag 固定指向
3283c05f8e42cdf8694bedf58330b71b3f3c667c,该提交已推送到 dev 和 main。
GitHub Release 为非草稿、非预发布,10 项远端资产的名称、大小和 SHA256 全部与本地构建匹配。
本版提供显式的网络标签布局、保留实体线树的无边界布局,以及原 Lib 输入的局部布局入口。 网络标签模式需用户明确同意,不自动替代原 direct/attachment 绘图要求。 原始网表、引脚、NC、功能归属和测量姿态保留,短接、遮挡和有限预算检查继续执行。
#273 离线复测的 20 件降压、13 件升压 在标签模式分别约 0.04 / 0.02 秒完成;默认搜索耗尽保留原判,不关闭其原始验收缺口。 现场 Apply、保存重载和完整 E2E 未在本轮运行。连接器运行逻辑及协议未改,发布包版本 统一到 1.8.1,不要求为新增离线能力重新导入连接器。
发布说明以 Changelog 的 1.8.1 条目为准; 构建、校验和正式发布按发布流程执行。
本地准备验证:全仓 Go 测试通过;Skill 检查、release-check 和五平台 release-build
通过;发布脚本测试 122 项通过。release-smoke 的 15 项本机 CLI 检查、201 文件 Skill
包、连接器版本/UUID 与全部九项载荷校验和通过。正式构建的本机 CLI 用 #273 原始输入复测,降压
0.040 s / 933 次消耗,升压 0.024 s / 337 次消耗,均完成局部布局及无纸张 SVG,
原输入哈希匹配,报告算法版本为 v1.8.1。非本机平台只做交叉编译与包完整性核验。
构建资产保存在忽略目录 dist/v1.8.1/,复测记录在 artifacts/issue-273-release-1.8.1/。
发布提交的两次 CI
检查均通过。
ClawHub 返回 easyeda-agent@1.8.1 发布成功;
SkillHub 自动发布成功提交
eda-agent-connector@1.8.1(skillId 173258),平台未返回审核状态,不据此宣称已完成平台审核。
远端资产核验明细保存在本地忽略的 artifacts/issue-273-release-1.8.1/remote-verification.json。
Nothing published for this version
修复连接器重连、窗口身份与迟到上下文处理,保留明确选窗和在途写入不重放行为。
Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Acceptance report, baseline and test cases: test-evidence.zip (SHA256 in checksums.txt).
2026-09-27 用户已批准直接发布 v1.8.0,范围为已验证的 CLI 修复。 完整 ESP32 成品测试留待后续,在 CLI Status 继续跟进;不再等待整板布线、最终 GND 内电层和 DRC 才能发版。
三页原理图、单次 PCB 导入、位号修复与未布线布局已完成有限现场和独立验证。 局部修改、写前拒绝与受控恢复只签已记录子例,不外推带铜移动或整板成品。 已知问题仍在 cli-known-bugs.md 维护;#55/#260/#261 为本次已接受限制,历史失败不改判。
已正式发布:GitHub v1.8.0。
发布时间为 2026-09-27 12:08:27(UTC+8);annotated tag 对应提交 2734b298b7dfd09d000b412d94420401248bc66c,已集成到 main。
GitHub Release 为非草稿,五平台 CLI、连接器、Skill、双平台安装脚本、验收包和校验和共 11 项远端资产
名称、大小及 SHA256 全部匹配。checksums.txt
包含十项载荷的摘要,校验和文件自身也已与 GitHub 摘要核对。
正式构建、release-check 和离线 smoke 通过;本机正式 CLI 的 15 项命令检查、201 文件 Skill 包及连接器版本/UUID 校验通过。
发布脚本测试 122 项、协作检查 13 项通过;运行逻辑与已采用的 83a98b2 一致。
其他平台仅编译与资产完整性检查,不声明跨平台运行或正式 1.8.0 现场全集复测。
验收材料使用 schema 3 cli-fixes,记录用户的版本与范围决定;完整 E2E 保持 in-progress。
此前完整设计报告原文保存在 历史执行记录,不补签完整设计通过。
独立范围复核见复核报告。
ClawHub 已成功发布 easyeda-agent@1.8.0,回执 ID 为 k979dcfrqscpn9se5wqg0ks3g18f6460。
skillhub.cn 自动发布任务已成功;平台审核与连接器市场人工提交另行跟进。
页面改名 #55 使用核对过的 UUID;区域/铺铜边界线宽 #260、铺铜优先级 #261 在无特定要求时使用宿主默认值。 这些字段的错值检测和失败退出继续保留;具体影响和剩余验证见基准,不声明其无功能影响。 用户此次批准的 CLI 修复发布范围不自动用于其他版本,也不改变后续工程写入与布局确认规则。
新增 typed web reload :保存文档后刷新 Web EDA,等待新的连接器注册并核对原工程/页面;工程查找支持有界总超时。
web reload:保存文档后刷新 Web EDA,等待新的连接器注册并核对原工程/页面;工程查找支持有界总超时。.eext,核对实际运行版本。1.6.0-dev.21 同版真实链路全部通过并经独立复核;正式包沿用同一产品源码,另做版本、构建及资产校验。范围为个人空间及既有自定义规则夹具,团队与首次规则初始化未验收。not-run。既有求解预算耗尽和严格 DRC 缺口不视为已解决;不宣称完整电路设计 E2E 通过。test-evidence.zip,包含声明范围、基准、逐项报告及哈希;基础通过不代表历史间歇缺陷已修复。Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Acceptance report, baseline and test cases: test-evidence.zip (SHA256 in checksums.txt).
本版交付基础 CLI 的 Web 重载、项目查找、写入回读与错误拒绝修复,并为三个已知问题增加操作提示。
连接器行为有变化,需同时更新 CLI/daemon、Skill 和 .eext。用户于 2026-09-26 批准发布 v1.7.0,
高级 CLI 验证保留到下一版本。
not-run。历史求解及严格 DRC 缺口继续保留。Go、连接器543项、MCP10项、发布脚本106项及Skill检查通过;五平台资产已构建, 校验和及本机15条离线smoke通过。802份产品源码与已测候选相同,连接器bundle仅版本字符串变化。 现场证据与本次发布材料均经独立复核。
发布后运行 easyeda update 更新 CLI 与 Skill;侧载连接器在扩展插件中卸载旧项,再导入
本版 .eext,启用允许外部交互。先保存已打开文档,加载新插件后以 easyeda health
确认实际版本与目标工程/页面。连接器市场版本单独维护,不将 GitHub 发布视为市场更新。
先核对该版本基础门禁,再按 A00–A06 验证需求选型、求解、 保护 Apply、原理图质量、PCB 布局布线和最终保存重载;逐项记录结果,保持原始需求输入。
Add parameterized PCB placement and routing foundations: schema-v3 layout intent, bounded candidate generation, replayable Apply playbooks, module-own
pcb module-check evidence after save/reload. The retained AT32F415 examples include live placement/routing facts plus explicit rejected candidates; they are reusable evidence, not a claim that the whole board or crystal module has completed final acceptance.pcb via-fence for perimeter-only GND/RF stitching around a protected rectangle. It includes each corner once, redistributes every edge so --pitch is a maximum spacing, expands outward with --margin, uses live via rules for unspecified sizes, and keeps dry-run pure. The crystal-guard contract requires controlled MCU spacing, short/direct OSC paths, an explicit TOP GND guard, TOP/BOTTOM no-pours, and an external GND via fence.project.open and project.export, Cobra and MCP wrappers, active-project/page identity checks, explicit unsaved-data acknowledgement, bounded native .epro2 transfer, ZIP/CRC validation, no-overwrite delivery, and SHA-256 reporting. The revised typed path was live-verified across two saved projects; archive import/restore remains unverified (restoreVerified:false).install.ps1, per-site part UUID relocalization, board-fitted PCB snapshots, typed layout-review evidence, V4 compatibility reporting, PCB stackup/config/net-color controls, document close/reload, poured-copper readback, and safer project/document recovery when no tab is active.null, never fabricated zeroes; CLI output and workflow gates now fail on a native failed verdict even when detailed counts are unavailable. Non-strict success may still report advisory warnings (#255).net_label writes on V3 or unknown hosts before a batch starts; allow a new, fully verified wire to preserve unchanged historical geometry findings while still failing any new/changed defect; and add guarded daemon stop/restart with live health/PID identity checks instead of guessing or terminating an unrelated process.activate(). Reuse one versioned transport controller across bundle evaluations, keep lifecycle calls delegated, and release it on deactivate() instead of registering competing sockets.layout-lint reports nets-unproven separately, and the Skill forbids classifying floatingPins as truly unconnected when the netlist read was unavailable..eext, reopen the Web editor, and verify the reported Connector version/actions. The release restores the stable marketplace UUID; the temporary dev.5/dev.6 fresh UUID was only a cache-bypass fallback and must not become the published identity.Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install (macOS/Linux):
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
First install (native Windows, PowerShell 5.1+):
irm https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.ps1 | iex
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Nothing published for this version
Add typed pcb.config.get/set and pcb config get/clearance/track/via/bind for parameterized PCB design rules: mil/mm conversion, Track-to-Track clearan
Add typed pcb.config.get/set and pcb config get/clearance/track/via/bind for parameterized PCB design rules: mil/mm conversion, Track-to-Track clearance, named track rules, via diameter bounds, and class/member Track assignments. Preserve unrelated settings, preview exact changes, detect source drift, and report unverified writes as partial failures. Reuse full-rule rollback/readback and accept config exports for restore. Real Web 3.2.203 fixtures cover the 260919 exam settings offline; live save/reload and the fixed ESP32 end-to-end regression remain pending.
Accept English “Confirm Importing changes information” / “Apply Changes” during typed PCB import, normalize whitespace/case, and retain exact button matching (#223). CLI diagnostics stop on unconfirmed import instead of directing an Agent to edit the project manually.
Document the V3.2 extension Config/Enabled permission controls and reported cross-version installation/cold-start workarounds (#222). The 3.2.149 cold-start defect (#221) remains unresolved; module bootstrap proposal #219 is not included.
Centralize long-read budgets at the CLI HTTP boundary: document open receives a 30s daemon window and includePins reads receive 150s, plus the existing 2s HTTP response grace. Explicit shorter diagnostic deadlines and larger caller budgets remain intact (#207, #214). Verify the live target UUID after an open error before failing the document guard.
Stop zone-arrange repair immediately on a failed connect_pin write, removing both unconditional replay and later repair-round replay (#206). This does not cancel late host promises or resolve the separate late-write cleanup issue #208.
Refocus the Skill on parameterized, source-attributed examples and typed-only project operations; include the existing main-branch workflow and PCB configuration work in this release.
Validation boundary: automated Go/connector/lint/Skill/release checks are run for this patch. No EDA window is connected on the release host, so the fixed ESP32 end-to-end regression and fresh-connector live import/save/reload verification remain incomplete. Do not treat this release as a completed board acceptance.
Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Add offline sch zone-review ownership diagnostics and run them automatically before layout-plan --zones . Reports preserve source hashes and explicit
sch zone-review ownership diagnostics and run them automatically before layout-plan --zones. Reports preserve source hashes and explicit component/pin/net evidence for multi-core hints, non-rail subgraphs detached from the declared core, and rail-only attachment endpoints, while leaving the source JSON and Apply state untouched for AI review.lib device validate --spec as an offline preflight for datasheet-backed library authoring. Complete Device builds now require manufacturer/MPN/package evidence with source pages, a declared land-pattern basis, valid symbol/footprint geometry, and an exact pin-to-pad mapping before any EasyEDA mutation. Route the public Skill through the new PDF-reading workflow and provide a reusable JSON example.pcb check: Track↔Track now uses its own rule instead of the larger Track↔Pad/Via routing clearance (#218).ARC,signedAngle,endX,endY source format with direction-checked ≤2° sampling, and select a unique containing outer ring from multi-polyline outlines while keeping unknown curves and ambiguous rings fail-closed (#215).Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Expose reusable, library-independent schematic layout calculation and deterministic SVG rendering through sch layout-plan and sch layout-render .
sch layout-plan and sch layout-render.sch layout-edit, and protected local marker repair with fresh-snapshot and out-of-scope stability guards.draft, topology_ready, and compose_ready readiness checks. Source exercises, reference drawings, private instance identities and local drafts are not release assets.update --local-dir, exact development-runtime checks, and Makefile targets for installed local daemon restart and validation.module_port pins as one real in-zone fanout tree after a functional split while retaining the source cross-zone port contract. Keep interleaved nets electrically separate and verify the exact physical islands that were joined.Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
本文是 v1.5.0 的发布说明草案,不构成发布或 ceshi 验收通过的证据。 数据驱动架构以 统一基准 为准; 文档更新、源码通过、本地安装验证与正式发布分别记录,不互相替代。 本次计划把此前本地开发验证的布局、数据复用和运行时修复合入正式版本。 版本与下载以 GitHub Release 为准,完整条目见 Changelog。
easyeda update 更新 CLI 与 Skill;侧载连接器需从本次 Release 下载,卸载旧项后
导入,并保存工程、重开 EDA 以加载新代码。升级/替换运行时后,显式读取实际版本与目标
页面;无需新建 Agent 会话。发布本身不会自动替换正在运行的本地开发环境。布局计算不再依赖先注册 Lib:普通组件集合可交 sch layout-plan,固定
sch layout-render 编译为 SVG。Zone 内的修复只影响自身,Zone 间按固定内边距和
Z 顺序放置;可计算有界的朝向、压缩与同页组合候选。通过审批的页布局可直接编译为
受保护 Apply 队列,不会在编译时悄悄重新排版。候选计算与实际 Apply/回读仍是不同阶段。
公共模块目录按就绪程度区分草稿、拓扑和可组合布局。打包只包含 Git 受控的公共 Skill 文件;题目正文、参考图、私有 UUID、临时验证产物及未跟踪草稿不随发行包发布。
离线开发包通过完整资产校验和 Skill 内容对账安装/检查;本地开发模式要求各运行时精确 同开发版,不是只改版本标记;版本对账提供运行态证据,不作为普通操作许可。
发布前执行 Go 与连接器测试、Skill/lint/module 审计、发行脚本测试,随后等待最终 main 提交的 Linux/macOS/Windows CI。发行资产包含五平台 CLI、连接器、Skill、安装器和 SHA-256 清单;发布后重新下载核对远端文件及本机 CLI 冒烟结果。
本次没有重跑 esp32MiniRequire.md 第一节到四层 PCB 的完整现场验收,不能把离线测试
和局部原理图验证等同于整板通过。EasyEDA 3.2.186 的一次现场会话中,原理图导图 API
对新旧符号均返回空文件;根因仍未确定,本版不宣称修复该接口。按键符号工作只留下私有
草稿,正式器件替换未完成,且没有为该次按键编辑改动 CLI 或连接器实现。
Nothing published for this version
Keep the strict latest-release session gate for CLI, installed Skill and running daemon, while accepting Connector patch drift within the same major.m
gh-proxy.com transport fallback only when checksums.txt was obtained directly from GitHub. Mirror-delivered CLI and Skill archives remain subject to the GitHub-published SHA-256 digest; EASYEDA_GITHUB_PROXY=off disables fallback.Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
Installs/updates:
The connector .eext is never auto-updated for sideloads. Connector patch drift within the same major.minor line is compatible; re-import only when easyeda update reports a major/minor mismatch.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Authenticate latest-release checks with GH_TOKEN / GITHUB_TOKEN , and fall back from an exhausted GitHub API quota to the public releases/latest redir
GH_TOKEN / GITHUB_TOKEN, and fall back from an exhausted GitHub API quota to the public releases/latest redirect. Apply the same redirect fallback in the one-line installer so an HTTP 403 does not falsely block an otherwise current installation.Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Make easyeda update --check --exit-code an exact GitHub-latest Agent-session gate for the CLI, installed Skill, running daemon and every connected Con
easyeda update --check --exit-code an exact GitHub-latest Agent-session gate for the CLI, installed Skill, running daemon and every connected Connector. Ahead, development, unknown, disconnected and stale states now block; Skill upgrades require ending the loaded Agent session and starting a new one before EDA work resumes.~/.agents/skills/easyeda-agent) in installer detection, version reports and atomic Skill updates.Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,agents,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Document the current Altium Designer project-import boundary: use EasyEDA Pro's GUI for .SchDoc / .PcbDoc , treat the beta API's undefined /no-op resu
.SchDoc / .PcbDoc, treat the beta API's undefined/no-op result as failure, and verify imported schematic, PCB outline and mechanical-layer data before continuing (#203).Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Keep the DSH bundle version aligned with this release and publish to SkillHub using its environment token without writing a runner credential file.
Keep the DSH bundle version aligned with this release and publish to SkillHub using its environment token without writing a runner credential file.
Verify explicit resistance queries numerically before ranking parts; preserve milli/mega prefixes and reject matches inferred from MPN digits. Add Skill guidance to retain parameter sources and verify manufacturer-specific value codes (#202).
Skip rotation calibration when connecting a native schematic net label, which has no rotation parameter. The host's EDA v4 label API remains pending on the tested 3.2.186 host; this does not claim native-label compatibility is fixed (#191).
Resolve DSH MCP and Skill file URLs with Node's fileURLToPath, preserving Windows drive/UNC paths and escaped characters (#201); add cross-platform path and native-launch CI tests.
Pass the officially resolved split-screen ID when opening documents, avoiding PCB reopen hangs observed after closing a tab on EasyEDA 3.2.186; do not report ready when the active document is still different.
Keep PCB document and board metadata readable after mutations so doc reload can recover stale primitive reads; metadata reads do not clear the stale-read gate.
Fix PCB silk text creation: use registered default font and legal LEFT_TOP alignment in free text, net names and pad labels; empty font / alignment 0 was rejected by EasyEDA 3.2.186.
Let an exact --doc UUID use matching live document/result context without depending on the PCB name catalogue. Reject inconsistent project, document or type evidence.
Recover an active PCB missing from document enumeration using official current-PCB information, requiring matching project/document identity before accepting the name (#190).
Accept action request bodies up to 32 MiB for base64 3D model imports (#199); test the exact limit and one-byte overflow.
Add sch modify --patch-file and pcb modify --patch-file for PowerShell 5.1 JSON quoting failures (#192). Accept UTF-8 BOM files, reject conflicting inline/file sources and non-object JSON before dispatch, and preserve explicit schematic flag overrides and PCB center guards.
Document native net-label API compatibility limits and readback requirements (#191).
Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Calculate reusable schematic Lib circuits from canonical nets and measured pin geometry, then compose compact Z-order pages with independently sized f
esp32MiniRequire.md requirement-to-four-layer-PCB regression was not rerun for this maintenance release.Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Introduce the 1.4 schematic connectivity IR: stable component IDs, separate display references and functional roles, complete pin/net/NC records, and
sch compose into guarded, sequential sch apply queues. Support compact Z rows, fixed margins, pink dashed frames with 0.2-inch titles, and collision-checked straight terminal leads with staggered lengths.sch designators allocate/plan/verify: preserve valid references, allocate invalid functional names from official library prefixes, and verify instance identity, geometry and wiring before and after an in-place repair.make release-check and make release-build, version/asset verification, and a tracked-file Skill packager shared by release channels.Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | bash
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Reject placed-instance UUIDs before schematic materialization so an invalid 16-character ID cannot hang the EasyEDA connector queue ( #196 ).
debug.exec_js asAlready installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
easyeda-agent v1.4.1 (internal preview) Pre-release
Pre-release
Compare
Reject placed-instance UUIDs before schematic materialization ( #196 ).
debug.exec_js results as base64.Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Add typed library.model3d.search and library.model3d.copy actions for selecting existing library models without UI automation.
library.model3d.search and library.model3d.copy actions for selecting existing library models without UI automation.library.device.set_model3d with exact Device-name preflight, model existence checks, bind/replace/clear support, and association readback verification.easyeda lib model3d search/copy and easyeda lib device model3d.Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Fixed — README 演示图改回包内相对路径(1.2.9 换版本号重传未解决,定位到真因)
1.2.9 曾假设「市场服务端处理 README 偶发失败,纯换版本号重传即可」——这个
诊断错了。1.2.9 重传后逐字节 diff 市场存的 readme 字段与本地文件,发现除
三张图片行被整行删除外其余文字一字不差,不是粗暴的解析失败,是精确命中
这三行。扫了市场上 100+ 其它插件的 README(同款 image.lceda.cn 图床、同款
排版),image.lceda.cn 绝对链接普遍工作正常,排除了「服务端偶发抽风」。
真因转向:README 里硬编码的三个 image.lceda.cn URL 不是本次上传产生的
——是半年前 0.23.0 那次转存时铸造的老链接,此后一直复用到 1.2.9。怀疑市场
对图片 URL 做了版本归属绑定,渲染当前版本时把「挂在旧版本记录下」的图片
引用当滤除对象。改回包内相对路径 images/demo-*.png|gif,让市场重新执行
「README 抽图 → 转存图床 → 改写链接」流程,为当前版本铸造全新 URL。
与 0.24.0 那次「相对路径抽图失败」的教训不冲突:那次是抽图步骤本身
出错(readme 字段整体缺失);这次绝对链接能正常返回图片,只是被
精确摘除三行,指向的是版本归属过滤而非抽图失败。若这次相对路径重新
抽图又失败,再退回绝对链接但换成全新图床 URL(而非复用旧链接)。
Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Fixed — 旋转探测旗删不掉就漏在画布上,拖垮 sch gate --strict
sch gate --strictdetectRotationNegation() 为测平台的旋转语义(createNetFlag 在某些 build 上存储
取负)会在离画布极远处造一支一次性探测旗 __ROTPROBE__,读回 rotation 再删掉。
那句 delete 没有回读验证 —— 而「删除撒谎」是本仓在别处早已按批处理 + 回读
兜住的平台已知病(delete 返回真值而图元仍在);delete 抛错还会被 catch 吞掉。
一旦撒谎,探测旗就永久留在画布上。
代价不在电路,在判据:sch bridge-check 把它算成一条 orphan-flag,于是
sch gate --strict(S5 逐页门用的就是它)在一块电路完全正确的板子上 FAIL
(2026-08-26 esp32MiniRequire 端到端实测,POWER 页)。
现在 delete → 回读 → 重试(至多 3 轮),仍在就经 eda.sys_Log 明着记一条并附上
清理命令 —— 沙箱里 console 是死代码,sys_Log 是唯一诊断出口。
daemon 侧另有一层收口(
sch_tool_probe_residue.go):按网名把探测残留归类成
「工具自己的垃圾」,不计进板子的 orphan 账但照常报出 + 给清理命令。那一层对
已经装好的旧连接器立即生效;这一层才是治本。
Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
1.1.2 从未发版(无 tag),它的条目并入本版。 升级方式 :CLI/skill 跑 easyeda update ; 连接器 sideload 必须手工重导入 (同 uuid 更新要先在「已安装」里卸载旧的,导入后完全退出并重启 EasyEDA)。
1.1.2 从未发版(无 tag),它的条目并入本版。
升级方式:CLI/skill 跑easyeda update;连接器 sideload 必须手工重导入
(同 uuid 更新要先在「已安装」里卸载旧的,导入后完全退出并重启 EasyEDA)。
CLI / daemon / 连接器三方版本对不上时,easyeda health 给出 versionGate 判定,
后续动作在 /action 层被直接拒绝并附修法,而不是让人先怀疑电路或工具坏了。
明知故犯的逃生口是 --skip-version-check(会写审计)。
modules[].parts 写的是 designator,而平台会在 create 时按自己的全局位号重编
(计划 C1 → 落地 C11)。位号对不上不会报错,只会让分区打分/连接器规则静默少算
一个模块。现在 sch block-apply --spec <s0.json> 落块即回填,或事后
easyeda spec backfill … --write;写入是外科手术(只替换那一段字节,键序/缩进/
未知字段一个不动),任一模块定位不到就整体拒写。
--force-stale-read:STALE_READ 的逃生口从「不存在的 flag」变成真的此前拒绝消息里印着一个并不存在的 flag,照抄跑不通。现在它是真 flag,带理由入审计,
且只放 PCB 读、解不开布线阶段门。
真机连续四次「连接器在负载下停摆」查到底了,根因不在重连、不在 WebSocket、也不在
daemon,而在主线程 setTimeout 在后台窗口里被节流/冻结,于是连接器所有基于
setTimeout 的守卫(FIFO 的放弃闸 22s、每次平台调用的 withTimeout 7s)到点不响。
证据(2026-08-24 三份 daemon 日志 + 审计逐条对齐):
schematic.power.connect_pin 进入 FIFO 队首,队列一动不动 6 分钟;document.current 每次 12ms 就回 —— WS、主线程、eda.* 桥全都活着;schematic.pages.list(本身 p50 只有 15ms)每条各烧满 18sEDA_* 而不是 ACTION_ABANDONED —— 三份日志与全部审计ACTION_ABANDONED 出现 0 次:放弃闸自上线以来一次都没响过。修法:新增 src/deadlines.ts,把所有「到点必须发生」的守卫登记成绝对时刻,
setTimeout 只当快路径,worker tick 的 sweepDeadlines() 是保底路径 —— 那是本
进程里唯一被真机证明不受后台节流影响的时基(看门狗当初正是为此搬进 Worker 的,
只是队列和 per-op 守卫被落在了老路上)。action-queue 的放弃闸与 actions.ts 的
withTimeout 一并改用它。保底路径的分辨率是一拍(3s),所以短守卫最坏晚一拍触发
——远好过晚六分钟。
行为变化:队首卡死时,连接器现在会在 timeoutMs + 2s 真的放弃它并回
ACTION_ABANDONED,队列继续流动。收到这个码 = 那次写的效果可能稍后才落地,
关于它的任何结论都不成立(seqAbandoned 已递增),必须回读复核后再决定,不要盲重试。
spec backfill / 分区打分把死页算进分母。新增 easyeda workflow pages --reap--prune(清数据);核销后的页会被 WARN 点名并明确排除出分母。--at 更远,挤的时候跑 sch clusters 看组间压没压到。两个内容分得开、只是版面余量对撞的区,现在直接画得出框。真画不出时报文给出逐条
最小位移(sch zone move --zone X --dy +N)。版面知识:竖着叠的两个功能区之间要留
≥96 单位(24 边距 + 42 说明带 + 30 区名带),横着排的贴着放也画得出框。
missing-partition 改看画布而非本地记账说明带的三把尺收敛成一把;sch check 的分区判据改由画布上的区标题文本作证
(与 zone-draw 生成标题同一个函数),消除「画布上明明有框、check 永远说没有」的恒报。
同时新增 page-too-small 判据:块/组比整页可用区还大时停手交回用户(拆页是设计决策,
工具不自动分页)。
一次广度优先的端到端(esp32Mini 固定用例)记了 19 条挂账,完整台账见仓库
docs/e2e-round-2026-08-25-findings.md。升级前值得先知道的三条:
sch group-move --ids 报「电气自检失败」却不回滚:位移照样落地,留下悬空脚 +✗ 不要当作没发生,先 sch bridge-check 复核画布。sch group create + --group,或 disconnect → modify → connect。sch destagger --apply 在相邻引脚场景仍会共线合并成短路,且「已按快照自动恢复」sch bridge-check 验一遍。sch gate --strict 目前无法出 verdict=pass:missing-titleblock 的唯一处方Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Docs — SKILL.md 顶部写清「这个 skill 单独装上没用」+ 连接器下载地址
从 skill 市场(skillhub / ClawHub)装到这份 skill 的人,拿到的只是指挥说明——
真正干活的是本机 easyeda CLI/daemon 和 EasyEDA Pro 里的连接器插件,两个外部件
一个都不能少。此前顶部只在一句话里夹带了插件市场链接,没有可直接照做的安装步骤。
现在写成三步:① 一行装 CLI;② 连接器 .eext 两个下载入口——立创EDA官方插件市场
(一键装、可原地自动更新,但版本可能滞后 CLI)与 GitHub Release 直下(与 CLI 严格
同版,四件套同版以它为准),并写明「同 uuid 更新必须先卸载旧的、导入后必须完全退出重启
EasyEDA」这两个静默失败点;③ 开「允许外部交互」并用 easyeda health 验证。
CLI / daemon / 连接器行为无改动,纯文档版本。
Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
本版把 1.0.3 – 1.0.5 三个未发布的中间版本一并放出。 minor 而非 patch,因为下面 第一条是行为破坏性变更 —— 升级后一批此前「能跑」的 PCB 读会开始报错。
本版把 1.0.3–1.0.5 三个未发布的中间版本一并放出。minor 而非 patch,因为下面
第一条是行为破坏性变更 —— 升级后一批此前「能跑」的 PCB 读会开始报错。
PCB mutation(rip-up / route / delete / via / track / pour)之后、easyeda doc reload
之前的 PCB 读(list / DRC / report / nets …),会被 daemon 在 /action 派发层拒绝,
错误码 STALE_READ。此前它只是一行非阻塞的 stderr 警告。
为什么升门(有实测,不是拍脑袋):把 49 天 / 171554 条审计记录里每条铁律的遵守率
和它在 SKILL.md 里占的篇幅对齐,两者完全反相关 —— 有 daemon 拦截的阶段门(铁律 14)
7 次跳步全被拦、0 漏网;而只发警告的铁律 5 被违反 1780 次(18.1%)。文字铁律的
天花板约 82%,机械门是 100%。
拒绝消息自带能直接执行的下一步,不只指路:
pcb.components.list —— PCB 自 pcb.line.create 后未 reload,读到的是旧引擎状态。
下一步: easyeda doc reload --project ceshi
(绕过: --force-reason "<理由>",入审计)
easyeda workflow advance / pcb check /layout-score 会撞 STALE_READ。这不是命令坏了 —— 在旧引擎状态上判 check 门easyeda doc reload 再跑。pcb.save / pcb.pour.rebuild / 任何 --dry-run 预览 / 只改视图的view-side·layers set-current·layers visibility / pcb.snapshot(它仍只带--force-reason "<理由>",审计里记成 daemon.stale_read.force 伪动作行。pcb refine / sync-designators / import-changes /power-planes / power-pour / route-critical / autoroute / pcb clear /verify: 块)已逐条加上窄到一次调用的放行位,不受影响;而 refineSTAGE_BLOCKED 的拒绝消息也带上补门命令此前只说「see easyeda workflow status」,现在直接给出该跑哪条:
pcb stage confirm-tier / confirm-outline / pcb layout-lint --gate /
workflow advance,按缺的是哪道门决定。
copperLayerCount 读不到时不再静默按 2 层降级板子若在命令开跑前就脏,一块 4 层板会被当成 2 层,于是走 power-pour 而不是
power-planes,两条电源轨挤在同一层 —— 正是内电层要解决的那个冲突。现在会把降级
明确说出来。
见下方 [1.0.5] 条目全文。摘要:daemon 重启后的重连从「十几秒」降到 ~2-3s;
顺带修掉「SLOW_RETRY_DELAY_MS = 10s 因为看门狗每 3s 抢先调用而从未真正生效」。
license / compatibility / metadataskills-ref validate 通过;版本号随 make release 自动同步。release: published → .github/workflows/publish-skill.yml。slug 为eda-agent-connector,与立创插件市场的连接器条目同名。Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Nothing published for this version
ADR-0004「挪动收敛为单一安全 move 内核」首批随版(源自 issue #181 两份 E2E 复盘)。CLI 侧:schMoveKernel 五步管线(快照→删证回读→snap 移动→快照重连→ 电气对账,失败自动恢复、目标页失效 fail-closed),group-move/zone
ADR-0004「挪动收敛为单一安全 move 内核」首批随版(源自 issue #181 两份 E2E
复盘)。CLI 侧:schMoveKernel 五步管线(快照→删证回读→snap 移动→快照重连→
电气对账,失败自动恢复、目标页失效 fail-closed),group-move/zone move/
zone-arrange/relayout/**destagger(解禁)**五命令收敛为内核调用方,
group-move --groups 多子组一次整体移动;--zone/--group 统一命名空间
(一张注册表+来源标签,报错列全量可用名);dry-run 纯计算机械保证(派发层
拒 Mutates)。连接器侧两条见下。
pcb.component.modify 解锁假成功(#174):平台 modify() 的真实锁字段是primitiveLock,而我们的读侧(pcb list)一直报 locked,调用方自然传{"locked":false} —— 平台静默忽略未知键仍返回成功(真机 22/22 报 ok、locked/lock 别名映射到primitiveLock,契约外的未知键硬报错(不再允许静默 no-op);verified + applied/notApplied/unverified;(3) 回读发现锁写被丢时setState_PrimitiveLock + done() 写路径(pcb.track.lock 验证过lockFallback:true);(4) 按 #151 部分应用约定:画布notApplied,零字段落地才报 ERROR。schematic.component.delete 级联清理(ADR-0004 Decision 5):删件后自动
找出只挂在被删件 pin 上的桩线树(union-find 共点归树 + 点到线段锚定,与
bridge-check 同一套判定)以及挂在这些树上的 netflag/netport/netlabel,一并
删除并回读证实。树若还触及任何存活器件的 pin 即视为共享,绝不删;被删件
自身残留(删除撒谎)时其树也整体跳过。结果新增
cascaded: {wires:[ids], flags:[ids]}(只列回读证明已删的 id);级联删除
撒谎的存活 id 按 #151 部分应用约定计入 notApplied(ok 保持 true + warning)。
根治「删件残留桩线/旗被后放件静默继承网名」的幽灵连接(v1.0.1 的 orphan-tree
判据只能事后抓,现在事前防)。CLI 渲染点(prim-delete / block-apply 回滚)
带一行「级联清理 N 桩线 M 旗」。
schematic.component.delete 新 payload 字段 cascade:false(退路):保持
旧行为(只删组件本体,不碰桩线/旗)——自己管整树删除的调用方(如 ADR-0004
的 move 内核)必须传它,避免级联与内核的整树管理相互踩踏。默认 cascade:true。
pcb.component.lock — 批量组件锁定/解锁(#174):输入 primitiveIds[] +
locked,走专用 setState_PrimitiveLock + done() 写路径,写后新鲜回读逐件
核对;结果 applied/alreadyInState/notApplied/missing + verified。
幂等(已在目标状态的只计数不重写);全部未落地时报 ERROR 而非假成功。CLI:
easyeda pcb lock --ids id1,id2 [--unlock] / easyeda pcb lock --all --unlock
(整板批量释放,--all 由 CLI 读活板 component 列表展开)。
Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Nothing published for this version
连接器侧一条修复(见下);CLI 侧同批落地:artifact 目录递归嵌套归一、 --doc 对读命令生效、 board.rebind 目录补登记(UNKNOWN_ACTION 出口补审计)、 裸 sch connect 35s 预算 + 慢速落地复核(slowLanded)、 sch group
连接器侧一条修复(见下);CLI 侧同批落地:artifact 目录递归嵌套归一、
--doc 对读命令生效、board.rebind 目录补登记(UNKNOWN_ACTION 出口补审计)、
裸 sch connect 35s 预算 + 慢速落地复核(slowLanded)、sch group-move
半途失败自动重连恢复、sch note --zone 框满走廊落点、sch autoconnect
带痕候选 WARN + --strict。
schematic.pin.disconnect 假成功:此前删除只调 delete 后不回读,平台对disconnected:true(真机复现:R5:1 / R5:2 / C4:2 断开后网表仍连)。且坐标ok:true + partial:true + notApplied/survivedIds,disconnected 仅在全部证实消失时为 true,deletedWires/deletedFlags 只计证实删除的 id)并附 warnings;CLI sch disconnect 把Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
里程碑:原理图功能正式上线(S0–S6 可交付)。 版本从 0.26.x 跃迁至 1.0.0, 连接器与 CLI/skill 同版(四件套同版约定)。0.26.1 未单独发布,其连接器变更 ( schematic.bridgeCheck 的 ORPHAN_TREE 悬空树判据,见下方 0.26.1
里程碑:原理图功能正式上线(S0–S6 可交付)。 版本从 0.26.x 跃迁至 1.0.0,
连接器与 CLI/skill 同版(四件套同版约定)。0.26.1 未单独发布,其连接器变更
(schematic.bridgeCheck 的 ORPHAN_TREE 悬空树判据,见下方 0.26.1 条目)随本版
一并发布。1.0.0 的主体变更在 CLI/skill 侧:三层布局体系(Sheet→Zone→Group,
分区框/区名/电路说明算法落位,生成与校验同一把尺)、sch gate --strict 五关
机械门禁、跨页网名审计 sch nets --strict、块对账 sch reconcile、netlist
黄金表逐脚比对;esp32Mini 真机端到端回归通过(3 页 / 26 件 / 18 网全对)。
连接器 0.26.x 与本版 CLI 协议兼容,但 orphan-tree 判据需本版连接器才生效。
Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
Nothing published for this version
连接器侧无代码变更 —— 版本号随 CLI 同步(四件套同版约定)。本版全部变更在 CLI/skill 侧: sch zone-arrange (功能区确定性布局两段求解 + --apply 断言门)、 sch status / sch nets / sch reconcile / sch clus
连接器侧无代码变更 —— 版本号随 CLI 同步(四件套同版约定)。本版全部变更在
CLI/skill 侧:sch zone-arrange(功能区确定性布局两段求解 + --apply 断言门)、
sch status/sch nets/sch reconcile/sch clusters/audit cost 新子命令、
图框(sheet)误删双层守卫与 sch titleblock --data 写入禁用令(写路径会损毁
sheet 符号引用,重启后图框丢失 —— 修复处方见 skill actions.md)、原理图 SOP
步骤卡。连接器 0.25.x 与本版 CLI 完全兼容。
Already installed? Upgrade in place:
easyeda update # CLI binary (sha256-verified) + skill dirs
easyeda update --check # report only
First install:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
The connector .eext is never auto-updated for sideloads — easyeda update reports a stale one and prints the re-import URL.
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
checksums.txt lists sha256 for every asset above.
连接器侧无代码变更 —— 版本号随 CLI 同步(四件套同版约定)。本版全部变更在
CLI/skill 侧:sch zone-arrange(功能区确定性布局两段求解 + --apply 断言门)、
sch status/sch nets/sch reconcile/sch clusters/audit cost 新子命令、
图框(sheet)误删双层守卫与 sch titleblock --data 写入禁用令(写路径会损毁
sheet 符号引用,重启后图框丢失 —— 修复处方见 skill actions.md)、原理图 SOP
步骤卡。连接器 0.25.x 与本版 CLI 完全兼容。
LICENSE 文件(GitHub 视角 = 版权
全保留,严格讲不是开源),声明只散落在 NOTICE/清单里且互相打架(根
package.json 写 MIT、连接器写 Apache-2.0)。现在补齐根 LICENSE(MIT),
extension.json 的 license 随之改为 MIT、package.json 改为 SPDX 复合
表达式 (MIT AND Apache-2.0)。例外:src/beautify/ 下四个文件移植自
Easy_EDA_PCB_Beautify(m-RNA),继续沿用 Apache-2.0 —— 无权改,也不必改(两者
兼容)。许可证全文放在 src/beautify/LICENSE,.eext 包内新增 extension/ LICENSE 承载 MIT 全文 + 第三方告知(dist/ 里含 beautify 的编译产物)。Nothing published for this version
修复立创插件市场审核驳回「README图片未加载成功,请检查存储路径」(0.24.0 被拒)。
修复立创插件市场审核驳回「README图片未加载成功,请检查存储路径」(0.24.0 被拒)。
images/demo-*.png|gif 改为 https://image.lceda.cn/extensions/images/...。.eext 时的「README 抽图 → 转存图床 → 改写链接」image.lceda.cn 绝对images/ 保留,./images/logo.jpg 不变)。One-line install/update:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
原理图布局体系定版:placement-first 区级重排( sch zone relayout )+ 串联链 共线串接 + 全员竖放平行对齐 + 顺方向 netport + 竖直旗真值表修正 + 三个新判据 (reversed-net-flag / marker-overlap 文字带 / re
原理图布局体系定版:placement-first 区级重排(sch zone relayout)+ 串联链
共线串接 + 全员竖放平行对齐 + 顺方向 netport + 竖直旗真值表修正 + 三个新判据
(reversed-net-flag / marker-overlap 文字带 / redundant-net-marker)。
连接器含 0.24.1–0.24.5 全部修复(合并线段对解析三处统一/orphan-stub 直连豁免)。
sch zone relayout —— placement-first 区级重排,用户点名的正确顺序)sch zone relayout --zone X [--apply]:与 zone tidy(挪带线的组)One-line install/update:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
Nothing published for this version
原理图能力大版:持久化编组 + 布局质量打分 + CLI 参数收敛(含 BREAKING)。 连接器侧含 0.23.1–0.23.3 的全部修复(见下)加本版的 group.move flag 支持与 schematic.snapshot 移除;CLI 侧新增见 repo commit 历史(fea
原理图能力大版:持久化编组 + 布局质量打分 + CLI 参数收敛(含 BREAKING)。
连接器侧含 0.23.1–0.23.3 的全部修复(见下)加本版的 group.move flag 支持与
schematic.snapshot 移除;CLI 侧新增见 repo commit 历史(feat/sch-zoned-layout-opt)。
sch group create/list/add/remove/ungroupsch group-move --group 成员桩线+标志自动展开随组刚移align/distribute 部分组硬拒绝(--break-group 放行)。sch layout-score 布局质量五维打分:折叠/反向/贴芯片距离/长链/框贴合,sch check 新增机械检查:missing-partition(多器件页未画分区框/说明,folded-net-label(netport 竖排折叠);autoconnect 打分器--ids 全域改 CSV(JSON 数组字符串不再支持);sch delete 移除(prim-delete 唯一删除入口);sch snapshot / schematic.snapshot 移除(出图统一 sch export-image,sch connect 新增 --pin 位号:脚号(与 --x/--y 互斥);sch modify 新增--x/--y/--rotation/--designator 快捷 flags。One-line install/update:
curl -fsSL https://raw.githubusercontent.com/zhoushoujianwork/easyeda-agent/main/install.sh | sh
Installs/updates:
Skill targets: set EASYEDA_INSTALL_SKILLS=codex,claude to force targets, none to skip, or EASYEDA_SKILL_PRESERVE=1 to keep local edits.
Nothing published for this version